Drainage feature (Subsidence Overlay): Difference between revisions

Latest revision as of 10:49, 10 February 2021

Icon	Key	Unit	Range	Description	Default value
	DRAINAGE	m + datum		The Drainage value has several behaviors, depending on its value. See the behavior description below.	-1.0

@@ Line 5: / Line 5: @@
 {{article end
 |notes=
-* A drainage is active when the Drainage value is larger than 0. In this case, the drainage always sets the ground water level to the same relative depth. The drainage value indicates the relative depth of the ground water.
+* For the type of behavior a drainage can have, see the [[Drainage (Subsidence Overlay)|drainage attribute]].
-* A drainage is passive when the Drainage value is smaller than 0. In this case, depending on which ground water level is used (high or low), the water level is additionally adjustmented by the [[Hi passive drainage (Subsidence Overlay)|high]] or [[Low passive drainage (Subsidence Overlay)|low passive drainage]] value configured for the [[Subsidence Overlay]]. In this case, the actual negative value of the drainage does not matter.
 |seealso=
 * [[Ground_water_depth_formula_(Subsidence_Overlay)|Ground water depth formula]]
 }}
 {{SubsidenceOverlay feature attribute nav}}