Basic Mode

What is Basic Mode?

• Basic Mode is selected during project creation, and enables large projects (max 180x180 km) with a medium (5m grid) map.
• Pending on the license agreement and hardware, maximum size can be smaller. Ff you can normally create 30x30 km projects, you can now create a 180x180km project in Basic Mode.
• Each domain can have 3 Basic Mode projects at the same time.
• Calculation grid size is set to 5x5m minimum, but larger grid sizes (10x10m, 20x20m, etc) can be selected.
• The Digital Elevation Model (DTM) is set to 10x10m in Basic Mode.
• To limit the high amount of polygons present in a Basic Mode project, BGT data and 3D models (buildings) will not be available.

How to use Basic Mode?

How to add Constructions:

1. Right click on the list of constructions
2. Select 'Add' from the context menu. This adds new construction to the construction list, named "0_Building".
3. The new construction is not present in the 3D World yet, since no selection has been added to the Construction yet.
4. For details on adding / changing a selection from a construction see see below.

• 

  A landmark

• 

  Another landmark