Storage model (Water Overlay): Difference between revisions

From Tygron Preview Support Wiki
Jump to navigation Jump to search
(Created page with "Water on the {{inlink|Surface model|surface}} can be stored in {{inlink|lcase=1|Water storage constructions}}. Water storage in constructions can be implicitly activated or d...")
 
 
(21 intermediate revisions by 5 users not shown)
Line 1: Line 1:
Water on the {{inlink|Surface model|surface}} can be stored in {{inlink|lcase=1|Water storage constructions}}.
Water on the [[Surface model (Water Overlay)|surface]] can flow into a building's [[Water storage (Water Overlay)|water storage]]. This mechanism allows for short term water storage to reduce peak flow caused by heavy rainfall.


Water storage in constructions can be implicitly activated or deactivated by ensuring that all constructions in the project area have appropriate water storage properties. If there are no constructions in the project area with water storage capacity, no water storage will take place.
Water storage in buildings can be implicitly activated or deactivated by adjusting their [[Water storage m2 (Water Overlay)|WATER_STORAGE_M2]] attribute. If there are no buildings in the project area with water storage capacity, no water storage will take place.


When water flows onto a cell with a {{inlink|Water storage constructions|construction capable of storing water}}, that water will be stored in the construction until the construction's water storage capacity has been reached. Water cannot leave that storage, either through flow back into the hydrological model or by being removed from it altogether. When the storage is filled, no additional water cannot flow into that storage for the remainder of the simulation.
When water flows onto a cell with a [[Water storage (Water Overlay)|building capable of storing water]], that water will be stored in the building until the building's water storage capacity has been reached. Water cannot leave that storage, neither through flowing back into the surface water model nor by being removed from it altogether. When the storage is full, no additional water cannot flow into that storage for the remainder of the simulation.


{{Template:WaterOverlay_nav}}
==Related formulas==
* [[Surface water level formula (Water Overlay)|Surface water level formula]]
* [[Surface flow formula (Water Overlay)|Surface flow formula]]
 
==Related models==
* [[Surface model (Water Overlay)|Surface model]]
{{article end
|seealso=
* [[Building_last_storage_result_type_(Water_Overlay)|Building last storage result type]]
}}
{{WaterOverlay formula nav}}

Latest revision as of 09:00, 29 January 2024

Water on the surface can flow into a building's water storage. This mechanism allows for short term water storage to reduce peak flow caused by heavy rainfall.

Water storage in buildings can be implicitly activated or deactivated by adjusting their WATER_STORAGE_M2 attribute. If there are no buildings in the project area with water storage capacity, no water storage will take place.

When water flows onto a cell with a building capable of storing water, that water will be stored in the building until the building's water storage capacity has been reached. Water cannot leave that storage, neither through flowing back into the surface water model nor by being removed from it altogether. When the storage is full, no additional water cannot flow into that storage for the remainder of the simulation.

Related formulas

Related models

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Models
Surface • Ground • Rain • Evaporation • Infiltration • Elevation • Breach • Sewer • Storage • Tracer flow • Border • Order
Model formulas
Timestep • Season • Surface water level • Groundwater level
Flow formulas
Surface flow • Surface infiltration • Ground flow • Ground infiltration • Surface evaporation • Ground evaporation • Ground bottom flow
Hydraulic structure formulas
Culvert • Weir • Breach growth • Breach flow • Pump • Sewer Overflow • Inlet • Drainage
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Model attributes • Results • Simulation data
Retrieved from "https://previewsupport.tygron.com/w/index.php?title=Storage_model_(Water_Overlay)&oldid=57904"