Root depth m (Water Overlay): Difference between revisions

From Tygron Preview Support Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(40 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Overlay attribute | ROOT_DEPTH_M
{{Building attributes
|m
| <onlyinclude>
|Depth of plant roots (m)
{{Building attributes|type=row|group=Water Overlay
|The depth of the roots of this construction, relative to the terrain height at the location of this construction. Water can be drawn from the underground and evaporated if the roots can reach it.
|attribute=ROOT_DEPTH_M
|unit=m
|range=0 to {{halfmaxvalue}}
|functionvalue=Depth of plant roots (m)
|description=The depth of the roots of this Building, relative to the terrain height at the location of this Building. Water can be drawn from the ground and evaporated if the roots can reach it.
|icon=waterwizard_icon_root_depth_m.png
}} </onlyinclude>
}}
}}


====Crops and foliage====
Buildings with a [[Depth of plant roots (Function Value)|root depth]] are known as crops and foliage.
Constructions representing crops and foliage can draw water from the {{inlink|Underground model|underground}}, allowing it to evaporate. This behaves in the same way as terrain which is configured as {{inlink|lcase=1|Plants}}.


===Notes===
[[Building]]s representing crops and foliage can draw water from the [[Ground model (Water Overlay)|ground]], allowing it to [[ground evaporation formula (Water Overlay)|evaporate]]. This behaves in the same way as [[terrain]] which is configured as [[terrain root depth m (Water Overlay)|plants]].
* When a construction is present in any given location, the values for evaporation will overrule any values set by {{inlink|Hydrological properties of terrain|terrain}} in the same location. To model underground evaporation without a construction, set these attributes on the applicable terrain type instead.


{{Template:WaterOverlay_attribute_nav}}
====Feddes Trapezium====
{{:Feddes trapezium}}
 
{{article end
|notes=
* For crops and foliage to evaporate water, both the ROOT_DEPTH_M and the [[Water evaporation factor (Water Overlay)|WATER_EVAPORATION_FACTOR]] must be appropriately configured.
* When a building is present in any given location, the values for evaporation in the ground will overrule any values set by [[Hydrological attributes of terrains (Water Overlay)|terrain]] in the same location. To model ground evaporation without a building, set the attributes of the building on the applicable terrain type instead.
* When a building has a ROOT_DEPTH_M of 0, the amount of evaporation which takes place in that location is 0.
|howtos=
* [[How to add and remove an Attribute]]
|seealso=
* [[Depth of plant roots (Function Value)]]
* [[Terrain root depth m (Water Overlay)]]
* [[Ground evaporation formula (Water Overlay)]]
* [[Groundwater level formula (Water Overlay)]]
* [[Ground model (Water Overlay)]]
* [[Evaporation model (Water Overlay)]]
}}
 
{{WaterOverlay hydrological building attribute nav}}

Latest revision as of 15:21, 27 February 2024

Icon Attribute Unit Range Description
Waterwizard icon root depth m.png ROOT_DEPTH_M m 0 to 65519 The depth of the roots of this Building, relative to the terrain height at the location of this Building. Water can be drawn from the ground and evaporated if the roots can reach it.

Buildings with a root depth are known as crops and foliage.

Buildings representing crops and foliage can draw water from the ground, allowing it to evaporate. This behaves in the same way as terrain which is configured as plants.

Feddes Trapezium

Plants can experience oxygen stress when the groundwater level is too high. The plant roots become saturated so that the plant can no longer transpire. To simulate the oxygen stress, the root depth can also be configured with four values instead of one, which will be interpreted using Feddes transpiration model. In the model, when the groundwater level rises, the transpiration increases. However, at a certain point, the groundwater is too high and the transpiration decreases. Water on the surface can then still evaporate, but the plant cannot transpire anymore.

The sequence for the four values should be defined in order of largest to smallest depth values and are interpreted as a 0-1-1-0 transpiration factor trapezium.

Feddes trapezium.jpg

Notes

  • For crops and foliage to evaporate water, both the ROOT_DEPTH_M and the WATER_EVAPORATION_FACTOR must be appropriately configured.
  • When a building is present in any given location, the values for evaporation in the ground will overrule any values set by terrain in the same location. To model ground evaporation without a building, set the attributes of the building on the applicable terrain type instead.
  • When a building has a ROOT_DEPTH_M of 0, the amount of evaporation which takes place in that location is 0.

How-to's

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Building attributes
Building height • Critical infrastructure • Ground infiltration md • Root depth m • Sewered • Solid • Water evaporation factor • Water manning • Water microrelief m • Tracer A • Tracer B • Tracer C • Tracer D
Related
Hydrological features • Hydraulic structures •  Terrain attributes • Model attributes • Results • Simulation data
Retrieved from "https://previewsupport.tygron.com/w/index.php?title=Root_depth_m_(Water_Overlay)&oldid=59492"