Revision as of 09:28, 19 January 2022

Icon	Attribute	Unit	Range	Description	Default value
	BRIDGE_ELEVATION	nominal		Specifies the mode by which bridges are include in the elevation model, used for the water calculations.	n/a

Enumeration

Notes

@@ Line 1: / Line 1: @@
 {{Overlay attributes|<onlyinclude>
 {{Overlay attributes|type=row|overlay=Water
-|attribute=INCLUDE_BRIDGE_ELEVATION
+|attribute=BRIDGE_ELEVATION
-|unit=boolean
+|unit=nominal
-|description=Whether to include bridges in the elevation model used for the water calculations.
+|description=Specifies the mode by which bridges are include in the elevation model, used for the water calculations.
 }}</onlyinclude>}}
-This attribute defines whether to include bridges and other floating buildings in the [[Elevation_model_(Water_Overlay)|elevation model]] used for the water calculations.
+Enumeration
 {{article end
 |notes=
-* This attribute is by default set to 0 which means bridges are not included so water can flow under the bridge.
+*
-* In the advanced settings step of the [[Water Overlay Wizard]], this attribute can also be (de)activated.
-* For more control, you can also set this attribute to 1 and use a [[Culvert_(Water_Overlay)|square culvert]] to regulate water flowing under a bridge.
 |howtos=