Weir move interval s (Water Overlay)

From Tygron Preview Support Wiki
Revision as of 13:31, 18 November 2022 by Maxim@tygron.com (talk | contribs)
Jump to navigation Jump to search
Icon Attribute Unit Range Description Default value
Weir drop time.png WEIR_MOVE_INTERVAL_S seconds Interval between Weir height adjustments in seconds. The Weir moves up/down to reach the target upstream water level. 3600


Notes

  • There is only one general interval time configured, applied to all weirs that have a target level.

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Model attributes
Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data
Retrieved from "https://previewsupport.tygron.com/w/index.php?title=Weir_move_interval_s_(Water_Overlay)&oldid=48790"