Object entry correction (Water Overlay)

Icon	Attribute	Unit	Range	Description	Default value
	OBJECT_ENTRY_CORRECTION	Integer		How many cells allowed to move hydraulic constructions if they would otherwise be inactive due to overlap with another hydraulic construction.	2

Objects (culverts, pumps, weirs) can sometimes overlap each other and then one or more objects become inactive. When this happens the rasterizer automatically moves the inactive object(s) start/end point(s) by a maximum of some amount of cells so the object(s) become active.

Notes

• This Attribute is by default set to 2 which means object correction is applied.
• 3 is the maximum allowed for this Attribute.
• In the advanced settings step of the Water Overlay Wizard, this Attribute can also be (de)activated.

How-to's

• How to add and remove an Attribute

---

Water Module

Water Module

Tutorials

Overview

Theory

Benchmarks

Group

Model attributes

Model attributes

Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s

Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m

Related

Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data