Terrain root depth m (Water Overlay)

From Tygron Preview Support Wiki
Revision as of 08:31, 9 May 2019 by Frank@tygron.nl (talk | contribs) (Frank@tygron.nl moved page Terrain Root depth m (Water Overlay) to Terrain root depth m (Water Overlay) without leaving a redirect)
Jump to navigation Jump to search

Template:Overlay attribute

Plants

Terrains can be configured with plant-related attributes, similar to crops and foliage constructions, allowing it to draw water from the underground and evaporate it.

How-to's

Notes

  • When a construction is present in any given location, the values for evaporation of the construction will overrule any values set by terrain in the same location. This is also true if the construction has its evaporation values set to 0; they will overrule the terrain's values and thus not allow evaporation of underground water to occur.
  • The groundwater level reduction is inversely proportional to the WATER_STORAGE_PERCENTAGE, as the contribution of a given volume of water to the groundwater level increases when the capacity for water storage in the underground layer decreases.
Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Terrain attributes
Ground infiltration md •  Hydraulic conductivity md •  Hydraulic conductivity with thickness md •  Root depth m •  Water •  Water evaporation factor •  Water manning •  Water microrlief m •  Water storage percentage
Related
Building attributes • Hydrological features • Hydraulic structures • Model attributes • Results • Simulation data
Retrieved from "https://previewsupport.tygron.com/w/index.php?title=Terrain_root_depth_m_(Water_Overlay)&oldid=23796"