Ground water (Water Overlay)

From Tygron Preview Support Wiki
Revision as of 08:56, 17 October 2022 by Frank@tygron.nl (talk | contribs)
Jump to navigation Jump to search
Icon Attribute Unit Range Description Default value
File:Waterwizard icon GROUND_WATER nominal value Whether and how water in the underground is simulated during the calculation. Infiltration Only

0. None: No infiltration, no groundwater flow, no underground evaporation.
1. Complete: Full groundwater simulation, including infiltration, flow, and evaporation
2. Infiltration only: Water can Infiltrate into the unsaturated zone only, but no further underground flow or underground evaporation is simulated. The unsaturated zone is simulated to have infinite capacity.

Notes

  • Groundwater Overlays have the underground model active by default. The other Water Overlay variants have the underground model set to infiltration only. This is a recommended setting, trading in an imperceptable amount of accuracy for a more performant calculation setup.
  • This setting does not affect water flowing in- and out of the sewer.

How-to's

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Model attributes
Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data
Retrieved from "https://previewsupport.tygron.com/w/index.php?title=Ground_water_(Water_Overlay)&oldid=48014"