Avg terrain width m (Water Overlay)
Revision as of 13:00, 29 January 2024 by Frank@tygron.nl (talk | contribs)
| Icon | Attribute | Unit | Range | Description | Default value |
|---|---|---|---|---|---|
 |
AVG_TERRAIN_WIDTH_M | m | 0 to 10000 grid cells | With the surface water mode set to Avg Terrain, identified water average areas can be extended to include surrounding terrain within the configured distance. | 1000 |
This allows water on land to be averaged with the waterways. Water on land that can be averaged has to be higher than the configured AVG_TERRAIN_STORAGE_M.
Water Overlay with set to Grid Averaging Terrains and an average terrain width of 1000m.
Water Overlay with set to Grid Averaging Terrains and an average shore width of 100m.
Difference in water level.
Notes
- This option is only used when the surface water mode is set to Avg Terrain.
- As indicated by the range, the average terrain width is converted to a grid cell amount; the average terrain width is divided by the grid cell size.
How-to's
- Group
- Model attributes
- Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
- Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
- Related