Advanced options (New Project Wizard)

What is the advanced options panel

The advanced options panel in the Wizard allows you to make a selection of data sources you want to use for creating your new project. It varies between the option to select or deselect a data source and change some settings like the resolution of data sources.

Where to find the advanced options

While selecting new Project's area, advanced options can be accessed.

When choosing the location of the project area during the New project Wizard, in the second panel of the wizard, the default mode for data selection is Selection. When this option is checked, the Tygron Platform will acquire datasets from a variety of open datasets that are linked to the selected area. Find an overview on which data is used to create a new 3D model on the Project Sources page. The Advanced Options panel can be found above the selection option. When you open this panel the list of a few of the open datasets is displayed. You can choose to include or excluded specific data sources in your project creation.

Options

A number of options are available.

Datasources

Main article: Project Sources

A number of Project Sources can be activated or deactivated. This leads entirely to some types of data being included or not, or downgraded to data from another data source.

Datatype	Source	Fallback	Effect
Constructions and spatial features	BGT	BAG	The BGT has greater detail than the BAG.
Risk Assesment	Risicokaart	-	Constructions are added and enriched with safety zones when present in the Projects location.
Agriculture	BRP	-	Crop fields, grassland for livestock, and other agrarian fields are loaded in as Cosntructions. Deactivating it will leave most agrarian fields empty.
Waterschapshuis	IMWA	-	Water system Constructions such as Culverts are retrieved from IMWA. Deactivating it will omit Constructions relevant for water systems.
Zoningplan	Ruimtelijke plannen	-	Zoning plans are added to the Project, with restrictions on what kind of Constructions can be placed in what locations. Deactivating it will omit the zoning plan entirely.
Underground	BRO	-	The underground Terrain is based on data from the BRO. Deactivating it will leave the underground entirely unknown.
I3S Scenelayer	I3S Scenelayer	-	Using I3S allows 3D models to be visualized for existing constructions. Otherwise Tygron uses its internal polygon-based Construction visualization technique.
Elevation model	AHN3	AHN2	The AHN3 is newer and more accurate than the AHN2. Both serve as direct input for the elevation model.

Enrichments

A number of options serve only as enrichments. The related data sources are not disabled entirely, but a specific type of data is not added to the Project.

Datatype	Source	Effect
Water	BGT / BAG	When activated, the BGT or BAG are used to add water to the Project. If deactivated, no water is added to the Project.
Ownership	BRK	Constructions are assigned ownership based on cadastral information combined with default assumptions connected to types of Constructions, and empty land belonging to the local municipality. If deactivated, all land will belong to the local municipality. Note that this still means Projects on municipal borders will still have land owned by different municipal Stakeholders, and that Stakeholders are still generated for the Project based on the types of Constructions presents in the project area.

Elevation model thresholds

If desired it's possible prefer using the DSM rather than the DTM when generating the elevation model for a new Project. This option can be useful when the data in the AHN is too much averaged and smoothed and more variation is desirable. When activated, the average DTM and DSM values within the polygons of certain features are compared. If the difference between the DTM and the DSM is small enough (i.e. smaller than the configured threshold), the value of the DSM is used. Otherwise, the value of the DTM is used.

It's possible to configure 3 thresholds in the following order:

Feature	Default threshold	Difference less than threshold	Difference greater than threshold
Bare land	1 m	The DSM value is used	The DTM value is used
Roads	0.25 m	The DSM value is used	The DTM value is used
Crop fields/agriculture	0.50 m	The DSM value is used	The DTM value is used

Elevation model resolution

Depending on the Project's use-case, the elevation model may need to be very accurate. For example, the Water Overlay can take very small variations into account when calculation water flow. If a more accurate resolution is selected, more detailed versions of the DTM and DSM are used to create the elevation model with.

Satellite map detail

All Terrain in a Project is textured using a satellite map from World Imagery. The level of detail of the satellite map can be changed. A higher resolution looks better.

How to's

• How to import i3s scene layer in new project