Drainage formula (Water Overlay)

Depending on whether the drainage is passive or active, the formula for either passive or active drainage is used.

Drainage passive

First the flow capacity is calculated

$Q_{p,t}=\Delta t\cdot q_{t}$

$Q_{b}=A_{d}\cdot f_{s}\cdot {\frac {(w_{d}-w_{w})\cdot A_{w}}{A_{d}\cdot f_{s}+A_{w}}}$

if $w_{w}>w_{d}$ then:

$Q_{max}=A_{w}\cdot (w_{w}-z_{w})$

else:

$Q_{max}=A_{d}\cdot (w_{d}-z_{d})\cdot f_{s}$

$Q_{d}=min(Q_{p,t},Q_{b},Q_{max})$

Where:

$q_{t}$ is the DRAINAGE_Q of the Drainage at time t.

$\Delta t$ is the computational timestep.

$Q_{p,t}$ is the possible amount of water drained, or pumped back when negative, based on the DRAINAGE_Q of the Drainage and timestep Δt.

$w_{d}$ is the ground water level, above the drainage, in meters.

$w_{w}$ is the water level in the waterway.

$z_{d}$ is the drainage datum height in meters.

$A_{d}$ is the drainage area size in square meters.

$A_{w}$ is the waterway area size in square meters.

$z_{w}$ is the max waterway height.

$f_{s}$ is the average storage percentage of the ground above the drainage.

$Q_{b}$ is the amount transferred for a balanced ground and surface water level.

$Q_{max}$ is the amount of water available in the ground above the drainage.

$Q_{d}$ is the actual drained volume at time t.

Drainage active

Case 1: Active Draining:

If a positive DRAINAGE_Q is defined:

$Q_{p,t}=\Delta t\cdot q_{t}$

$Q_{g,t}=(w_{g,t}-z_{d})\cdot f_{s}$

If an overflow threshold $T_{o,t}$ is defined as well:

$Q_{o,t}=max(0,T_{o,t}-w_{t,w})$

The actual water pumped out of the drainage system is calculated. If any of the terms are undefined, they are not included.

$Q_{t}=max(0,min(Q_{g,t},Q_{o,t},Q_{p,t}))$

Case 2: Active Reverse Draining:

If a negative DRAINAGE_Q is defined:

$Q_{p,t}=\Delta t\cdot q_{t}$

$Q_{w,t}=min(0,z_{w}-w_{t,w})$

If an overflow threshold $T_{o,t}$ is defined as well:

$Q_{o,t}=min(0,T_{o,t}-w_{t,w})$

The actual water pumped into the drainage system is calculated. If any of the terms are undefined, they are not included.

$Q_{t}=max(0,max(Q_{p,t},Q_{w,t},Q_{o,t}))$

Where:

$w_{g}$ is the ground water level in meters

$w_{w}$ is the water level in the waterway

$z_{d}$ is the drainage datum height in meters.

$A_{d}$ is the drainage area size in square meters.

$A_{w}$ is the waterway area size in square meters.

$z_{w}$ is the max waterway height.

$f_{s}$ is the average storage percentage of the ground above the drainage.

$Q_{b}$ is the amount transferred for a balanced ground and surface water level

$Q_{max}$ is the amount available in the ground above the drainage.

$Q_{p,t}$ is the drainage capacity at time t

$Q_{d}$ is the actual drained volume at time t

Notes

• A negative DRAINAGE_Q can potentially raise the ground water level at the drainage so much that it reaches the surface above the drainage.

Related

The following topics are related to this formula.

Structures

Drainage (Water Overlay)

Models

Surface model (Water Overlay)

Underground model (Water Overlay)

---

Water Module

Water Module

Tutorials

Overview

Theory

Benchmarks

Models

Surface • Ground • Rain • Evaporation • Infiltration • Elevation • Breach • Sewer • Storage • Tracer flow • Border • Order

Model formulas

Timestep • Season • Surface water level • Groundwater level

Flow formulas

Surface flow • Surface infiltration • Ground flow • Ground infiltration • Surface evaporation • Ground evaporation • Ground bottom flow

Hydraulic structure formulas

Culvert • Weir • Breach growth • Breach flow • Pump • Sewer Overflow • Inlet • Drainage

Related

Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Model attributes • Results • Simulation data