Impact flood threshold m (Water Overlay)
(Redirected from Impact flood threshold m model attribute (Water Overlay))
Jump to navigation
Jump to search
The impact flood threshold m setting can be configured in the Output Overlays step of a Water Overlay wizard when the impacted buildings result is selected as an output overlay.
| Icon | Attribute | Unit | Range | Description | Default value |
|---|---|---|---|---|---|
 |
IMPACT_FLOOD_THRESHOLD_M | m | The amount of water a Building must experience before it is considered impacted by water. | 0,1 |
Water must reach this height either on one of the cells the Building is on, or on one of the cells adjacent to it. With the impact range m attribute the width of the water along the facade can be adjusted. This is used to compute the Impacted buildings result type.
Water Overlay with a configured flood threshold of 0.1m and a impact range of 3m.
Water Overlay with a configured flood threshold of 0.5m and a impact range of 3m.
Surface last value result overlay of a 30 minute flood caused by a Breach.
- Group
- Model attributes
- Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
- Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
- Related