Average calculation model (Heat Overlay)

From Tygron Preview Support Wiki
Revision as of 13:55, 18 December 2019 by Rudolf@tygron.nl (talk | contribs)
Jump to navigation Jump to search

The wind speed and direction, measured at a weather station, are used to determine the window for averaging values around a cell. In calculations with a low wind speed, an cell-centered averaging window is used. In calculations with a high wind speed, an oblong rectangle is used for averaging, with the cell in question offset towards the far side along the line of the wind direction.

Wind speed:

  • < 1.5 meter per second, the window is square and cell centered
  • >= 1.5 meter per second, the window is oblong.
Window Model Low wind speeds High wind speeds
Large window
700x700 meters, cell-centered
1100x500 meters, centered at 1000x250x100x250
Small window
175x175 meters, cell-centered
280x140 meters, centered at 210x70x70x70

See also

Heat Module
Benchmarks button.png
Heat introduction button.png
Heat Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Formulas
UHI • Temperatures • Diffuse radiation • PET
Calculation models
Foliage height • Sky view factor • Shade • Average vegetation and sky view factor
Related
Calculation models and formulas • Feature attributes • Model attributes • Result types



Benchmarks button.png
Heat introduction button.png
Heat Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Retrieved from "https://previewsupport.tygron.com/w/index.php?title=Average_calculation_model_(Heat_Overlay)&oldid=30389"