New pages

07:5307:53, 17 February 2025 How to debug a long calculation project using DEBUG UV (hist | edit) [1,834 bytes] Vincent@tygron.nl (talk | contribs) (Created page with "The calculation time of a water overlay can be influenced by several factors; the number of grid cells, the grid cell size, the total computing time, etc. An aspect that is even more difficult to grasp, but is just as important, is the complexity of the calculation. This includes the distribution of the water, the acceleration, and the types of models that are calculated (sewer, infiltration, waterworks, etc). A phenomenon that we do see a lot is that in (more complex)...")

15:0315:03, 14 February 2025 Max foliage radius (Shadow Overlay) (hist | edit) [522 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay attributes| <onlyinclude>{{Overlay attributes|type=row|overlay=Shadow |attribute=MAX_FOLIAGE_RADIUS |unit=m |description=The maximum radius of foliage. |icon= |defaultvalue=100 |range=0 to 1000 }}</onlyinclude>}} Limits the range for calculated foliage height, based on function's foliage crown factor. {{article end |notes= |seealso= |howtos= * Foliage height calculation mode...")
14:5814:58, 14 February 2025 Hour (Shadow Overlay) (hist | edit) [35 bytes] Frank@tygron.nl (talk | contribs) (Redirected page to Dates (Shadow Overlay)) Tag: New redirect
10:3310:33, 14 February 2025 Partial end sec (Water Overlay) (hist | edit) [687 bytes] Maxim@tygron.com (talk | contribs) (Created page with "{{Overlay attributes|<onlyinclude> {{Overlay attributes|type=row|overlay=Water |attribute=PARTIAL_END_SEC |unit=seconds |description=End point in simulation time (as defined in the overlay's weather). Can be used to e.g. stop earlier then the time array in the weather. |icon= |defaultvalue=floatmaxvalue |range=0 to {{floatmaxvalue}} }}</onlyinclude>}} Note: When this value is larger then the weather time array it will be ignored (default). {{WaterOverlay model attribu...")
10:3010:30, 14 February 2025 Partial start sec (Water Overlay) (hist | edit) [601 bytes] Maxim@tygron.com (talk | contribs) (Created page with "{{Overlay attributes|<onlyinclude> {{Overlay attributes|type=row|overlay=Water |attribute=PARTIAL_START_SEC |unit=seconds |description=Starting point in simulation time (as defined in the overlays weather). Can be used to e.g. start one hour (3600) later then defined by the weather. |icon= |defaultvalue=0 |range=0 to {{floatmaxvalue}} }}</onlyinclude>}} {{WaterOverlay model attribute nav}}")

11:4611:46, 13 February 2025 Foliage height (Shadow Overlay) (hist | edit) [905 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Building attributes | <onlyinclude> {{Building attributes|type=row|group=Shadow Overlay |attribute=FOLIAGE_HEIGHT |unit=m |functionvalue= |description=The top height of foliage for a surface geometry described by an Area. |icon= |range=0-100 }} </onlyinclude>}} {{article end |notes= * The Foliage height for an area will be the same for each position in the area. The height is not interpolated as with the Foliage crown factor (Shadow Overlay)|Foliage crown...")
11:4311:43, 13 February 2025 Terrain elevation prequel (Shadow Overlay) (hist | edit) [633 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay prequels|overlay=Heat|allowselflinks=true| <onlyinclude>{{Overlay prequels|type=row|overlay=Shadow |prequel=TERRAIN_ELEVATION |name=Terrain elevation |unit=m (datum) |description=Used for initializing the digital terrain model used for this Shadow Overlay. |min=-10000 |max=10000 }}</onlyinclude> }} {{article end |notes=* The values in this prequel grid are clamped between the mentioned min and max. No data values are not allowed. An Average Overl...")
11:4211:42, 13 February 2025 Foliage height prequel (Shadow Overlay) (hist | edit) [714 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay prequels|overlay=Heat|allowselflinks=true| <onlyinclude>{{Overlay prequels|type=row|overlay=Shadow |prequel=FOLIAGE_HEIGHT |name=Foliage height |unit=m |description=Used for initializing the relative foliage heights. |min=0 |max=100 }}</onlyinclude> }} {{article end |notes=* The values in this prequel grid are clamped between 0m and 100m. No data values are not allowed, although negative no data values will result in a foliage height of 0. * The fo...")
11:4011:40, 13 February 2025 Building elevation prequel (Shadow Overlay) (hist | edit) [636 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay prequels|overlay=Heat|allowselflinks=true| <onlyinclude>{{Overlay prequels|type=row|overlay=Shadow |prequel=BUILDING_ELEVATION |name=Building elevation |unit=m (datum) |description=Used for initializing the digital surface model used for this Shadow Overlay. |min=-10000 |max=10000 }}</onlyinclude> }} {{article end |notes=* The values in this prequel grid are clamped between the mentioned min and max. No data values are not allowed. An Average Ove...") originally created as "Building height prequel (Shadow Overlay)"
11:3911:39, 13 February 2025 Prequels (Shadow Overlay) (hist | edit) [360 bytes] Frank@tygron.nl (talk | contribs) (Created page with "Prequel overlays can be linked to the Shadow Overlay to initiate particular parts of the model with more accuracy and detail. {{Overlay prequels|suppresscategory=true|allowselflinks=true| {{:Building elevation prequel (Shadow Overlay)}} {{:Foliage height prequel (Shadow Overlay)}} {{:Terrain elevation prequel (Shadow Overlay)}} }} {{ShadowOverlay nav}}")
11:2611:26, 13 February 2025 Shade calculation model (Shadow Overlay) (hist | edit) [68 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{: Shade calculation model |Shadow Overlay}} {{ShadowOverlay nav}}")
10:5210:52, 13 February 2025 Shade calculation model (hist | edit) [2,628 bytes] Frank@tygron.nl (talk | contribs) (Created page with " The shade is dependent on the location of the sun. This in turn is dependent on the [[Dates ({{1}})|date and the time of day]] and the world location of the project. Since each timeframe result of a [[{{1}}]] is related to a particular date and time of day, each time frame will have a related [[Sun altitude ({{1}})|sun altitude]] and [[Sun azimuth ({{1}})|sun azimuth angle]]. These angles are calculated automatically based on the world location of your project and the...")
10:4810:48, 13 February 2025 Shade result type (Shadow Overlay) (hist | edit) [519 bytes] Frank@tygron.nl (talk | contribs) (Created page with "350px|thumb|right|Shade result type overlay (Wageningen) {{result types|<onlyinclude> {{result types|type=row|overlay=Shadow |name=SHADE |icon=Overlay icon heat shade.png |unit={{boolean}} |mode=Date-Time |description=Indicates whether a cell is in the shade or not based on sun ray calculations. }}</onlyinclude>}} {{article end |notes= |seealso= * Shade calculation model (Shadow Overl...")
10:4710:47, 13 February 2025 Foliage result type (Shadow Overlay) (hist | edit) [1,330 bytes] Frank@tygron.nl (talk | contribs) (Created page with "350px|thumb|right|Foliage result type overlay (Wageningen) {{result types|<onlyinclude> {{result types|type=row|overlay=Shadow |name=FOLIAGE |icon=Overlay icon heat foliage.png |unit=fraction |mode=Start |description=The initial and optional calculated foliage height, depending on the source of the foliage height. }}</onlyinclude>}} {{article end |notes= * Foliage can be supplied in three w...")
10:4510:45, 13 February 2025 Foliage height calculation model (Shadow Overlay) (hist | edit) [61 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{: Foliage height calculation model}}")
10:4410:44, 13 February 2025 Foliage height calculation model (hist | edit) [3,460 bytes] Frank@tygron.nl (talk | contribs) (Created page with "Knowing where foliage is present and at what height it is situated for each grid cell of a Heat Overlay is important and used in the Shade and Skyview calculation models. The foliage height for each grid cell can be determined in a number of ways: * By supplying the areas which each hold the height of foliage for the whole polygon of...")
10:4310:43, 13 February 2025 Foliage crown factor (Shadow Overlay) (hist | edit) [1,339 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Building attributes | <onlyinclude> {{Building attributes|type=row|group=Shadow Overlay |attribute=FOLIAGE_CROWN_FACTOR |unit=ratio |functionvalue=Foliage crown factor |description=The ratio between the height of tree trunks and the diameter of the foliage of the tree. |icon= }} </onlyinclude>}} The foliage crown factor is used to calculate the extend of foliage, which can influence the calculation of the sky view and the shade. The height of the Building mul...")
10:4010:40, 13 February 2025 Foliage Area (Shadow Overlay) (hist | edit) [904 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Building attributes | <onlyinclude> {{Building attributes|type=row|group=Shadow Overlay |attribute=FOLIAGE_HEIGHT |unit=m |functionvalue= |description=The top height of foliage for a surface geometry described by an Area. |icon= |range=0-100 }} </onlyinclude>}} {{article end |notes= * The Foliage height for an area will be the same for each position in the area. The height is not interpolated as with the Foliage crown factor (Shadow Overlay)|Foliage crown...")
10:2410:24, 13 February 2025 Max shadow distance (Shadow Overlay) (hist | edit) [481 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay attributes| <onlyinclude>{{Overlay attributes|type=row|overlay=Shadow |attribute=MAX_SHADOW_DISTANCE |unit=m |description=The maximum length of a shadow. |icon= |defaultvalue=500 |range=100 to 1000 }}</onlyinclude>}} Limits the search range for shadows, which reduces the calculation time for the Shade result type. {{article end |notes= |seealso= |howtos= * Shade calculation model (Shadow Overlay). }} {{ShadowOverlay...")
10:1310:13, 13 February 2025 Sun azimuth (Shadow Overlay) (hist | edit) [867 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay attributes| <onlyinclude>{{Overlay attributes|type=row|overlay=Shadow |attribute=SUN_AZIMUTH |unit={{geoangle}} |description=The angle of the sun along the horizon. |icon= |range=-{{doublemaxvalue}} to {{doublemaxvalue}} |defaultvalue=140.03 }}</onlyinclude>}} The sun azimuth indicates the direction of the sun, relative to the project area. {{article end |notes= * The sun altitude and azimuth are (re)calculated automatically...")
09:5409:54, 13 February 2025 Sun altitude (Shadow Overlay) (hist | edit) [740 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay attributes| <onlyinclude>{{Overlay attributes|type=row|overlay=Shadow |attribute=SUN_ALTITUDE |unit={{angle}} |description=The sun angle up from the horizon. |icon= |defaultvalue=49.71 }}</onlyinclude>}} {{article end |notes= * The sun altitude and azimuth are (re)calculated automatically based on the project world location and the date, when the dates of the overlay are modified via the Heat Overlay...")
09:5009:50, 13 February 2025 Dates (Shadow Overlay) (hist | edit) [1,015 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay attributes|<onlyinclude> {{Overlay attributes|type=row|overlay=Shadow |attribute=DATES |unit={{time_in_milliseconds}} |description=Dates define the amount of timeframes and are used to define the day and time for calculating sun angles. |icon= |defaultvalue=1375444800000 }}</onlyinclude>}} {{article end |notes= * It is recommended to use the Shadow Overlay Wizard to generate and edit the dates. * The sun altitude and Sun az...")
09:4709:47, 13 February 2025 Foliage areas (Shadow Overlay) (hist | edit) [808 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay attributes| <onlyinclude>{{Overlay attributes|type=row|overlay=Shadow |attribute=FOLIAGE_AREAS |unit={{boolean}} |description=Whether to use foliage data from Areas instead of the calculated foliage decks from functions with a foliage crown factor. |icon= |defaultvalue=0 }}</onlyinclude>}} {{article end |notes= |seealso= *Foliage height calculation model (Shadow Overlay) *Foliage height prequel (Shadow Overla...")
09:4309:43, 13 February 2025 Model attributes (Shadow Overlay) (hist | edit) [769 bytes] Frank@tygron.nl (talk | contribs) (Created page with "The heat overlay's model calculations depend on a number of calculation-wide parameters. These parameters are available as attributes of the heat overlay and can be modified as such. {{Overlay attributes|suppresscategory=true| {{ :Dates (Heat Overlay) }} {{ :Foliage areas (Heat Overlay) }} {{ :Max shadow distance (Heat Overlay) }} {{ :Sun altitude (Heat Overlay) }} {{ :Sun azimuth (Heat Overlay) }} }} {{article end |notes= * When the [...")

16:4316:43, 10 February 2025 Shadow Overlay (hist | edit) [1,561 bytes] Maxim@tygron.com (talk | contribs) (Created page with "Shadow overlay is identical to the Shade result type of an Heat Overlay, only much faster. {{article end }} {{Overlay nav}}")

14:0614:06, 4 February 2025 Tygron Client Application (hist | edit) [27 bytes] Frank@tygron.nl (talk | contribs) (Redirected page to Tygron Client) Tag: New redirect
12:2712:27, 4 February 2025 How to adjust configure the initial pixel size of satellite images (hist | edit) [795 bytes] Frank@tygron.nl (talk | contribs) (Created page with "Specifying the resolution of the satellite images before generating a project.")

12:5112:51, 29 January 2025 How to import an ONNX file for an Inference Overlay (hist | edit) [1,021 bytes] Frank@tygron.nl (talk | contribs) (Created page with "Option Neural Network Selection panel: {{editor steps|title=import an ONNX file using the Neural Networks panel | Create or open a project as an editor using the Tygron Client | Select the tab Current Situation in the ribbon bar | If you have an existing Inference Overlay, Click on Overlays and select it in the Overview on the left. : Otherwise: Hover over Overlays, and under Grid Calculation, select AI Inference | With the Overlay selected, in its detai...")

09:5009:50, 27 January 2025 Demo projects (hist | edit) [35 bytes] Frank@tygron.nl (talk | contribs) (Redirected page to List of Demo Projects) Tag: New redirect
07:5507:55, 27 January 2025 Demo Training Data Project (hist | edit) [7,784 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{demo project summary | title=Demo Train Dataset | image=demo_train_dataset.jpg | demographic=people who are working in fields such as AI, remote sensing, data analysis, and urban planning | showcases=a method in the {{software}} to export a dataset for training a Mask R-CNN model. | description=The demo is a working project in which a number of areas are drawn, using a satellite overlay as underlay. These areas are marked with specific attributes, making it easy to exp...") originally created as "Demo Train Dataset Project"

13:4513:45, 24 January 2025 Version 2025.3.0 (hist | edit) [385 bytes] Maxim@tygron.com (talk | contribs) (Created page with "Version 2025.3.0 is released on preview.tygron.com on February 28th 2025. '''Updates''' * Several smaller bug fixes, security updates and WIKI Updates. Category:Version 2025")

13:0713:07, 22 January 2025 How to export AI Training Data (hist | edit) [1,418 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{editor steps|title=export an AI dataset | Open a project in editor mode using the Tygron Client Application | Optionally add a Satellite Overlay. This overlay will be used to export train images for the dataset. | Determine what [item] type will be used to export a dataset for. For example: existing buildings with a particular attribute, or previously drawn areas on top of the satellite overlay. | Select the ''Export Geo Data'' option in the Ribbon bar popu...") originally created as "How to export an AI dataset"
12:1812:18, 22 January 2025 How to train your own AI model for an Inference Overlay (hist | edit) [4,032 bytes] Frank@tygron.nl (talk | contribs) (Created page with "To train your own AI model for an Inference Overlay in the {{software}}, you will need datasets to train on. To export these datasets using your projects in the {{software}}, follow this how-to. {{editor location|overlays|}} {{editor steps|title=train your own AI model for an Inference Overlay | Either clone the repository [https://github.com/Tygron/tygron-ai-suite], or simply download the [https://github.com/Tygron/tygron-ai-suite/a...")

14:4414:44, 20 January 2025 Attribute surface only (Combo Overlay) (hist | edit) [349 bytes] Maxim@tygron.com (talk | contribs) (Created page with "{{Overlay keys|<onlyinclude> {{Overlay keys|type=row|overlay=Combo |key=ATTRIBUTE_SURFACE_ONLY |unit=Boolean |description=When true (1) only surface items of e.g. Buildings are queried as value of the ATTRIBUTE statement in the Combo Overlay. |defaultvalue=0 |icon=distancewizard_icon_distance_zone_m.png }}</onlyinclude>}} {{article end }}")
14:4214:42, 20 January 2025 Attribute default value (Combo Overlay) (hist | edit) [314 bytes] Maxim@tygron.com (talk | contribs) (Created page with "{{Overlay keys|<onlyinclude> {{Overlay keys|type=row|overlay=Combo |key=ATTRIBUTE_DEFAULT_VALUE |unit=- |description=The default value for the ATTRIBUTE statement in the Combo Overlay when no items can be found. |defaultvalue=0 |icon=distancewizard_icon_distance_zone_m.png }}</onlyinclude>}} {{article end }} {{ComboOverlay nav}}")

13:5513:55, 16 January 2025 How to select specific input data for A.I. Inference (hist | edit) [6,095 bytes] Vincent@tygron.nl (talk | contribs) (Created page with "[Work In Progress]")

09:1109:11, 14 January 2025 Version 2025.2.0 (hist | edit) [834 bytes] Maxim@tygron.com (talk | contribs) (Created page with "Version 2025.2.0 is released on engine.tygron.com on January 31th 2024. '''Updates''' * Several smaller bug fixes, security updates and WIKI Updates. Category:Version 2025")
09:1009:10, 14 January 2025 Version 2025.1.3 (hist | edit) [341 bytes] Maxim@tygron.com (talk | contribs) (Created page with "Version 2025.1.3 is released on engine.tygron.com on January 17th 2024. '''Updates''' * Improved feedback for Inference panel. * Improved NN Architecture. * Several smaller bug fixes, security updates and WIKI Updates. Category:Version 2025")

12:3112:31, 8 January 2025 How to set the Geo-location of a AutoCAD DXF (hist | edit) [4,340 bytes] Vincent@tygron.nl (talk | contribs) (Created page with "<youtube>-NlCZpytHZA</youtube> DWG files can be indirectly imported into a Project, by first converting them to a DXF file (the open-standard equivalent). DXF files can then be imported directly through the Geo Data Wizard, as either features in the Current Situation, or in the Future Design. However, it is important that the entities and objects in the DXF file are at the correct geo-location. AutoCAD itself does not geo-transforms coordinates....")

14:0814:08, 7 January 2025 Version 2025.1.2 (hist | edit) [377 bytes] Maxim@tygron.com (talk | contribs) (Created page with "Version 2025.1.2 is released on engine.tygron.com on January 10th 2024. '''Updates''' * Drains are not longer limited by the surface height. * Bugfix for joining session multiple times when calculating. * Improved GPU Architecture. * Several smaller bug fixes, security updates and WIKI Updates. Category:Version 2024")

12:0712:07, 19 December 2024 How to adjust a Neural Networks metadata (hist | edit) [1,596 bytes] Frank@tygron.nl (talk | contribs) (Created page with " <pre> import onnx </pre> Save the onnx model to file: <pre> with open(onnxFilePath, "wb") as f: f.write(onnx_model.SerializeToString()) </pre>")

15:3315:33, 16 December 2024 Center points result type (Inference Overlay) (hist | edit) [490 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{result types|<onlyinclude> {{result types|type=row|overlay=Inference |name=CENTER_POINTS |icon=overlay_icon_inference_center_points.png |unit=integer |description=Labeled centerpoints of identified objects. }}</onlyinclude>}} {{article end |notes= * The center points are calculated using the bounding boxes. |seealso= * Inference Overlay }} {{InferenceOverlay nav}}") originally created as "Center Points result type (Inference Overlay)"
14:5114:51, 16 December 2024 Prioritize labels (Inference Overlay) (hist | edit) [727 bytes] Frank@tygron.nl (talk | contribs) (Created page with "{{Overlay attributes|<onlyinclude> {{Overlay attributes|type=row|overlay=Inference |attribute=PRIORITIZE_LABELS |unit=boolean |description=Whether overlapping identified objects should select the ones that have the lowest label. |defaultvalue=1.0 |range=0.0 or 1.0 |icon=inferencewizard_icon_prioritize_labels.png }}</onlyinclude>}} {{article end |notes= * When this option is set to true, the identified objects are sorted based on their label, then on their score and the...")

12:2712:27, 5 December 2024 Version 2025.1.1 (hist | edit) [429 bytes] Maxim@tygron.com (talk | contribs) (Created page with "Version 2025.1.0 is released on preview.tygron.com on December 13th 2024. '''Updates''' * Faster BAG3D loading when creating a new project. * Update to latest CUDA version for improved GPU stability. * Several smaller bug fixes, security updates and WIKI Updates. Category:Version 2025")

New pages

17 February 2025

14 February 2025

13 February 2025

10 February 2025

4 February 2025

29 January 2025

27 January 2025

24 January 2025

22 January 2025

20 January 2025

16 January 2025

14 January 2025

8 January 2025

7 January 2025

19 December 2024

16 December 2024

5 December 2024

Navigation menu

Search