Global: Difference between revisions

Latest revision as of 10:22, 1 March 2023

Globals in comparison to Overlays, Indicators and Panels

A global is a value that exists in the project but is not necessarily connected to a specific component. The global can be used, for example in Excel calculations and influence the calculation of an Excel indicator. A global is similar to an attribute but for the entire project rather than for a specific component. The name of the global is also the global ID that can be used in queries.

Global uses

Globals can be used, broadly speaking, to store and recall values. The most common application of this is in combination with excel sheets. Using TQL, the value of a global can be loaded into an excel sheet and used in calculations. The values of globals can also be set using TQL from excels. Globals can also be used to directly influence the budget of a specific stakeholder. Lastly, globals can be made visible in the 3D Visualization.

Properties of globals

A global is always made up of a name and a number. Based on the purpose of the global the number represents an amount or a value which is specified by the name.

Output

By using a SELECT_GLOBAL_WHERE_NAME_IS_GLOBALID query you can obtain the value of a global. This global's value can then be used in Excel calculations. It is also possible to connect the global to the budget of a specific stakeholder to directly influence the budget during a session. When the given value is a positive number it will increase the budget. When the given value is a negative number it will decrease the budget.

Input

There are 4 ways that a global's value can be set:

Each global has a starting value. At the start of a session, the global is set to this value.
A global can be updated using a TQL update statement, of the form UPDATE_GLOBAL_WHERE_NAME_IS_X.
A global's value can be changed by making use of a SET_GLOBAL_VALUE event.
A global can be directly linked to a TQL select statement, by setting the TQL property to a valid query.

With the exception of linking a global directly to a TQL select statement, each method is a singular action to alter the global's value at one specific moment. Linking a global directly to a TQL select query will cause the global to be updated accordingly with every calculation cycle. This will easily overwrite any singular action such as an event. When using a TQL update statement in an excel to update a global, the effect will be similarly continuous, causing the global's value to update each calculation cycle.

@@ Line 1: / Line 1: @@
-{{learned|what a global is|how to add Globals|what type of globals you can create|where globals currently applied for}}
+[[File:Api_current_situation_calculation.png|thumb|right|400px|[[Global]]s in comparison to [[Overlay]]s, [[Indicator]]s and [[Panel]]s]]
+A global is a value that exists in the project but is not necessarily connected to a specific component. The global can be used, for example in Excel calculations and influence the calculation of an Excel indicator. A global is similar to an [[attribute]] but for the entire project rather than for a specific component. The name of the global is also the global [[ID]] that can be used in queries.
-==Global==
+==Global uses==
-A globals ia a number that is intecrated in the project but is not nessccarelay assinged to a specifiche object. The global can be used for Excel calculations and therefor influence the projects outcome.
-==Type of globals==
+Globals can be used, broadly speaking, to store and recall values. The most common application of this is in combination with [[excel]] sheets. Using [[TQL]], the value of a global can be loaded into an excel sheet and used in calculations. The values of globals can also be [[TQL#Numeric_values|set using TQL]] from excels. Globals can also be used to directly influence the budget of a specific [[Stakeholder|stakeholder]]. Lastly, globals can be made visible in the [[3D Visualization]].
-There are two types of globals. One that can be attached to the budget of a certian stakeholder and can be used to influence the budget of that specific stakeholder during the session.
-The other one is a global that can be attatch to an [[Event Bundle | Event Bundle]] and influence the (score) outcome of an indicator without influencing the budget.
-===Budget===
+==Properties of globals==
+A global is always made up of a name and a number. Based on the purpose of the global the number represents an amount or a value which is specified by the name.
-===Event Bundle===
+===Output===
+By using a <code>SELECT_GLOBAL_WHERE_NAME_IS_GLOBALID</code> query you can obtain the value of a global. This global's value can then be used in [[Excel|Excel]] calculations.
+It is also possible to connect the global to the budget of a specific stakeholder to directly influence the budget during a session. When the given value is a positive number it will increase the budget. When the given value is a negative number it will decrease the budget.
-==Adding and removing Globals==
+===Input===
-{{editor ribbon|header=Inicators|bar=Globals}}
+There are 4 ways that a global's value can be set:
+* Each global has a starting value. At the start of a session, the global is set to this value.
+* A global can be updated using a TQL update statement, of the form <code>UPDATE_GLOBAL_WHERE_NAME_IS_X</code>.
+* A global's value can be changed by making use of a SET_GLOBAL_VALUE [[event]].
+* A global can be directly linked to a TQL select statement, by setting the TQL property to a valid query.
-[[File:Add_global.png|framed|left|The [[Left Panel]] allows you to add, duplicate, and remove globals.]]
+With the exception of linking a global directly to a TQL select statement, each method is a singular action to alter the global's value at one specific moment. Linking a global directly to a TQL select query will cause the global to be updated accordingly with every [[calculation cycle]]. This will easily overwrite any singular action such as an [[event]]. When using a TQL update statement in an excel to update a global, the effect will be similarly continuous, causing the global's value to update each calculation cycle.
-You can create a new global, which can then be added to [[Event Bundles | Event Bundles]].
-{{Editor steps|title=add a global|In the ribbon header, select "Indicators".|In the ribbon bar, select "Globals".|In the dropdowm menu, select "Edit Globals".|In the left panel, select "Add".}}
-{{Editor steps|title=duplicate a global|In the ribbon header, select "Indicators".|In the ribbon bar, select "Globals".|In the dropdowm menu, select "Edit Globals".|In the left panel, select the global you wish to duplicate.|In the left panel, select "Duplicate".}}
-{{Editor steps|title=remove a global|In the ribbon header, select "Indicators".|In the ribbon bar, select "Globals".|In the dropdowm menu, select "Edit Globals".|In the left panel, select the global you wish to remove.|In the left panel, select "Remove".}}<br clear=all>
-==Global Uses==
+{{article end
-Globals are currently used to communicate with a Microsoft Excel spreadsheet, when using such a spreadsheet for a (custom) [[Excel (Indicator)|Excel Indicator]].
+|howtos=
-Globals are also currently used to attatch to [[Events|Event Bundels]] and hereby influence the progress of indicators.
+* [[How to add and remove Globals]]
+* [[How to edit Global properties]]
+|seealso=
+[[File:YoutubeLogo1.jpg|link=https://youtu.be/IpQxzjzi1d0|thumb|left|200px|Panels en Globals (Dutch only)]]
+}}
+{{Editor current situation nav}}
+[[Category:Items]][[Category:Global]]

Global: Difference between revisions

Latest revision as of 10:22, 1 March 2023

Contents

Global uses

Properties of globals

Output

Input

How-to's

See also

Navigation menu

Global: Difference between revisions

Latest revision as of 10:22, 1 March 2023

Global uses

Properties of globals

Output

Input

How-to's

See also

Navigation menu

Search