Traffic Model

Please note: This page is currently being updated.

What is a Traffic Model

From Wikipedia, the free encyclopedia

A traffic model is a mathematical model of real-world traffic, usually, but not restricted to, road traffic. Traffic modeling draws heavily on theoretical foundations like network theory and certain theories from physics like the kinematic wave model. The interesting quantity being modeled and measured is the traffic flow, i.e. the throughput of mobile units (e.g. vehicles) per time and transportation medium capacity (e.g. road or lane width).

How does a Traffic Model relate to the Tygron Platform?

The main purpose of the default traffic model in the Tygron Platform is to calculate the effects of traffic on the 3D World through traffic densities. In order to calculate this impact, data such as the number of traffic lanes, the traffic speed and the traffic flow on a particular lane can be added to the project. The traffic model is a static model that does not change by carrying out Actions, Upgrades or Measures for example. Read below how to create your own dynamic traffic model and use it in the Tygron Platform. The following overlays show data from/effects of the traffic model:

• Traffic Density (Overlay)
• Traffic NO2(Overlay)
• Traffic Noise (Overlay)

Traffic Data

When creating a new project a traffic model is generated for the selected project area, based on available open data sources. The following datasets are used:

• NSL Monitoringstool
• NWB (Nationaal Wegen Bestand)
• INWEVA 2015
• VI-Lucht & Geluid

Edit Traffic data

The right panel shows details about the selected road part

Height offset

This field specifies the height offset of a bridge

Units per hour

This field specifies the number of units that can drive on a road in an hour

Lanes

This field specifies the number of lanes that a road can have

Noise Sigma

This field specifies the standard deviation value of the noise signal

Noise Tau

This field specifies the tau value of the noise signal

Speedlimit

This field specifies the max allowed speedlimit on road or part of a road

Add a custom Traffic Model

It is also possible to creata and add a custom traffic model, better suited for your use case. The traffic model can be either a static model (the model and data do not change in the project) or a dynamic model (the model and data change when something in the 3D world changes).

Static Traffic Model

A static model does not change (over time), when changes occur in the 3D world. This type of model can be used when you for example have a scenario for 2030 ready that contains the traffic intensities then and want to use this data in your project. To upload the dataset, create a Geojson file of the data and make sure the features contain an attribute with the number of units/hour. This attribute will overwrite the current TRAFFIC_FLOW attribute of the roads. When importing this data, Constructions that are intersected by sections of the imported data are given the new traffic flow attribute of imported data.
Template:Editor ribbon

How to add a static traffic model:

1. Drag and drop a prepared Geojson file on the Editor
2. Select "Import Building Values" from the "File Handler" panel
3. Ensure the attribute TRAFFIC_FLOW is activated on the "Import Building Values File" panel
4. Select the "Send" button on the same panel

• Editor.jpg

  Drag and drop a prepared Geojson file on the Editor

• ImportBuildingValues.jpg

  Select "Import Building Values" from the "File Handler" panel

• SelectTrafficFlowAttr.jpg

  Ensure the attribute TRAFFIC_FLOW is activated

• ImportBuildingValuesFileSend.jpg

  Select the "Send" button

Dynamic traffic model

A dynamic model changes (over time), according to changes in the 3D world. An example of a dynamic traffic model is a model in where is calculated how the traffic intensity changes when building a certain amount of houses. Effectively the TRAFFIC_FLOW attribute of the roads will be updated with a new value, when building houses in the Tygron Platform. To create such a model, first create a Geojson file with the roads that will be changed by a certain Action or Measure and import the file. In an Excel file, the calculation for how much and when the traffic intensity changes has to be made. This file can be uploaded as either an indicator or panel. The indicator or panel explanation text in this case is not relevant. The Excel is only used to define the model and import it in the Tygron Platform. The Excel implementation of a simple dynamic traffic model, consists of the following consecutive steps:

• Retrieval of the original traffic density in Area X - SELECT_ATTRIBUTE_WHERE_NAME_IS_TRAFFIC_FLOW_AND_AREA_IS_X
• Calculation in an excel file, with the new traffic density as outcome - original traffic density + change
• Output of the new traffic density for constructions in Area X - UPDATE_BUILDING_TRAFFIC_FLOW_WHERE_AREA_IS_X

Template:Editor ribbon

How to add a Dynamic Custom Traffic Model:

1. Drag and drop a prepared Geojson file on the Editor
2. Select "Import Areas" from the "File Handler" panel
3. Ensure the attribute TRAFFIC_FLOW is activated on the "Import Areas File" panel
4. Select the "Send" button on the same panel

• Editor.jpg

  Drag and drop a prepared Geojson file on the Editor

• ImportAreas-FileHandler.jpg

  Select "Import Areas" from the "File Handler" panel

• ImportAreaFile.jpg

  Ensure the attribute TRAFFIC_FLOW is activated

• ImportAreaFileSend.jpg

  Select the "Send" button