Function Value

Function values are specific values which form the general properties of any construction with a specific function. A function has many function values, and any construction of that function also has those function values.

Function values can be changed for an individual construction, or for a function, which in turn would affect all constructions of that function.

See also F.A.Q. webinar for an explanation about Function Values.

Overwrites

Function Values can be defined on several levels. Primarily, they can be defined on Functions. The Function Values of Functions can be overwritten by adding them to the Function Values window. Additionally, a Function can be duplicated, and that new Function will effectively have the same values of the original Function. Lastly, regardless of the Function a Construction has, it can have its own Function Values as well. This means the used Function Values are determined as follows:

• If a Construction has their own Function Value set, that value is used.
• Otherwise, if the Construction's Function has an explicit Function Value defined, that value is used.
• Otherwise, if that Function was created by duplicating another Function, that Function's value is used. This step is repeated until either a value is found, or the original Function (from which all the others are derived) is found.
• The original Function always has a valid Function Value.

Category values

Some function values are construction-related, and some function values are category-related. The difference between them is only applicable if a single function consists of multiple function categories. For example, the function value indicating the maximum amount of floors for the construction is related to the construction as a whole. However, if the function contains both social housing and luxury housing, the individual types of housing can have different unit sizes configured, as one type of housing may offer bigger housing units than the other.

When accessing a category value as an attribute, the attribute's name is prefixed by the category's name. For example: UNIT_SIZE_M2 becomes SOCIAL_UNIT_SIZE_M2.

Overview of all function values

Most function values have specific effects in the context of the Tygron Platform. Individual function values can be grouped into categories based on their effects or themes.

Name

Function value	Attribute	Unit	Per category	Range	Description
Name	(Property of function value)	text			The name of the Function.

Assets and visualisation

Function value	Attribute	Unit	Per category	Range	Description
Image	(Property of function value)	Image (png, 200x100)			The image used to represent this function. This property is currently unused.
Extra color	EXTRA_COLOR	color	No	-2147483648 to 2147483647	The color of the walls of the floors of the building which are neither the top nor bottom floor.
Ground color	GROUND_COLOR	color	No	-2147483648 to 2147483647	The color of the walls of the bottom floor of a building.
Roof color	ROOF_COLOR	color	No	-2147483648 to 2147483647	The color of the roof of a building. For flat building (such as gardens and roads), it is also the color of the ground surface.
Terrain mix	TERRAIN_MIX	fraction	No	0 to 1	The transparency of the ground color of the function.
Top color	TOP_COLOR	color	No	-2147483648 to 2147483647	The color of the walls of the top floor of a building, unless that floor is also the bottom floor.
Description	(Property of function value)	text			The textual description of this function, which is displayed to the user when using this function as as action.

Construction

Construction time in months (Function Value)

Demolish time in months (Function Value) Floating (Function Value)

Function value	Attribute	Unit	Per category	Range	Description
Align Elevation	ALIGN_ELEVATION	Integer	No	0 to 2	Attribute that determines whether a Building is aligned relative to the elevation model (in case of an uneven surface), flat on the ground, or floating.
Category weight	CATEGORY_WEIGHT	decimal	Yes	4.9E-324 to 1.7976931348623157E308	How much of a building of this function is classified under the specified category.
Default floors	DEFAULT_FLOORS	integer	No	1 to 250	How many floors a building of this function will have by default, unless otherwise specified. When using this Function as an Action, this is the default amount of floors created, unless the user changes this setting while performing the Action. This values must always be in the range of min floors and max floors (inclusive).
Floor height m	FLOOR_HEIGHT_M	m	No	0 to 1.7976931348623157E308	The height of each floor of the Building.
Height offset	HEIGHT_OFFSET_M	m	No	-1.7976931348623157E308 to 1.7976931348623157E308	How many meters above or below the datum this building should be visualized. This is intended for bridges or other buildings on water, so that they can be lined up appropriately with the surrounding land, or float at an appropriate height.
Max floors	MAX_FLOORS	integer	No	1 to 250	The maximum amount of floors this Building (or any of its sections) can have. This also limits how many floors a Building can have when used as an action during a session.
Min floors	MIN_FLOORS	integer	No	1 to 250	The minimum amount of floors this Building (or any of its sections) should have. This also limits how many floors a Building must have when used as an action during a session.
Monumental	MONUMENTAL	boolean	No	0 to 1	Whether this building is monumental. Monumental buildings can be disallowed for demolition by the zoning plan.
Slanting roof height	SLANTING_ROOF_HEIGHT	m	No	0 to 10	How high the slanting roof at the top of the building should be visualized at its peak. The roof will slant inwards equally from all sides. This is a visual effect only, but it is possible to reference this value in custom calculations.
Solar Panels	SOLAR_PANELS	Boolean	No	0 to 1	Attribute that determines whether a Building has solar panels or not.
Unit size	UNIT_SIZE_M2	m²/unit	Yes	0 to 1.7976931348623157E308	How large a single housing unit within this Building is. This is only relevant for residential categories.
Zoning permit required	ZONING_PERMIT_REQUIRED	boolean	No	0 to 1	Whether the municipal stakeholder should be requested permission, when another user uses this function as an action to plan a new building during a session.

Environment

Green space (Function Value)

Safety distance (Function Value)

Function value	Attribute	Unit	Per category	Range	Description
Bowen ratio	BOWEN_RATIO	ratio	No	0.001 to 10	The ratio between two forms of heat transfer between this building's surface and the atmosphere.
Critical infrastructure	CRITICAL_INFRASTRUCTURE	integer	No	0 to 10	Number indicating the critical infrastructure priority of a building in case of calamities.
Distance zone m	DISTANCE_ZONE_M	m	No	0 to 2000.0	The distance drawn in Distance Overlays by this building.
Disturbance distance m	DISTURBANCE_DISTANCE_M	m	No	0 to 2000.0	The distance drawn in the Distance Overlay by this building.
Foliage crown factor	FOLIAGE_CROWN_FACTOR	ratio	No	0 to 10	The ratio between the height of tree trunks and the radius of the foliage of the tree.
Heat effect	HEAT_EFFECT	°C	No	-10 to 10	The capacity of this building for heat retention.
Livability effect	LIVABILITY_EFFECT	decimal	No	-10 to 10	The effect this building has on the Livability Overlay calculations.

Financial

Function value	Attribute	Unit	Per category	Range	Description
Buyout cost	BUYOUT_COST_M2	currency/m²	Yes	0 to 1.7976931348623157E308	How much it costs, in addition to the demolition costs, to demolish this Building during a session, when the Building is not vacant. These costs are due to eviction or buyout of existing tenants.
Construction cost	CONSTRUCTION_COST_M2	currency/m²	Yes	0 to 1.7976931348623157E308	How much it costs to create a new building, when using this function as an action during a session.
Demolition cost	DEMOLISH_COST_M2	currency/m²	Yes	0 to 1.7976931348623157E308	How much it costs to demolish this Building during a session. If the building is not vacant, the buyout costs are applicable as well, in addition to the demolition costs.
Sell price	SELL_PRICE_M2	currency/m²	Yes	0 to 1.7976931348623157E308	How much revenue is generated for the owner, when a building of this function is created during a session. The income is only generated once, when the construction of the building has completed.

Network

Function value	Attribute	Unit	Per category	Range	Description
Heat flow change per year	HEAT_FLOW_M2_CHANGE_PER_YEAR	m²/year	Yes	-1.7976931348623157E308 to 1.7976931348623157E308	For any net load connected to an address part of a Building of this function, the amount of resources (FLOW) requested in addition to those in the starting year during every subsequent year. The amount of resources requested starts at HEAT_FLOW_M2_START_VALUE in the start year, and is then increased by this value every year until the building's year of creation, and finally multiplied by the size of the address(es) the net load is associated with to get a default FLOW value for the net load.
Heat flow formula start year	HEAT_FLOW_M2_START_YEAR	year	Yes	0 to 3000	For any net load connected to an Address part of a Building of this function, the start year for the calculation of the amount of resources (FLOW) requested. The amount of resources requests starts at HEAT_FLOW_M2_START_VALUE in this year, and is then increased by HEAT_FLOW_M2_CHANGE_PER_YEAR every year until the building's year of creation, and finally multiplied by the size of the address(es) the net load is associated with to get a default FLOW value for the net load.
Heat flow to power multiplier	HEAT_POWER_TO_FLOW_MULTIPLIER	factor	Yes	-1.7976931348623157E308 to 1.7976931348623157E308	For any net load connected to an address part of a building of this function, the divisor used to convert the automatically calculated FLOW to an automatically calculated POWER attribute. The automatically calculated FLOW divided by this value is the automatically calculated POWER. Note that an explicitly defined FLOW attribute is not used in this calculation.
Heat flow value at start year	HEAT_FLOW_M2_START_VALUE	m²	Yes	-100 to 100	For any net load connected to an address part of a Building of this function, the amount of resources (FLOW) requested by the net load in the defined starting year. This value is increased with the HEAT_FLOW_M2_CHANGE_PER_YEAR, until the building's year of Building, and finally multiplied by the size of the address(es) the net load is associated with to get a default FLOW value for the net load.
Pipes permitted	PIPES_PERMITTED	boolean	No	0 to 1	Whether net lines are allowed to be generated under this building.

Traffic

Traffic is split up into two further categories, to differentiate between traffic which may apply to Traffic Overlays and alternative types of traffic.

Car traffic

Function value	Attribute	Unit	Per category	Range	Description
Buses per hour	NUM_BUSES	vehicles/h	No	0 to 1.7976931348623157E308	How many buses move over any given cross-section of the road per hour, spread across all lanes.
Cars per hour	NUM_CARS	vehicles/h	No	0 to 1.7976931348623157E308	How many cars move over any given cross-section of the road per hour, spread across all lanes.
Trucks per hour	NUM_TRUCKS	vehicles/h	No	0 to 1.7976931348623157E308	How many trucks move over any given cross-section of the road per hour, spread across all lanes.
Vans per hour	NUM_VANS	vehicles/h	No	0 to 1.7976931348623157E308	How many vans move over any given cross-section of the road per hour, spread across all lanes.
Bus jam factor	JAM_FACTOR_BUSES	fraction	No	0 to 1	The fraction of buses considered to be in traffic jam.
Car jam factor	JAM_FACTOR_CARS	fraction	No	0 to 1	The fraction of cars considered to be in traffic jam.
Truck jam factor	JAM_FACTOR_TRUCKS	fraction	No	0 to 1	The fraction of trucks considered to be in traffic jam.
Van jam factor	JAM_FACTOR_VANS	fraction	No	0 to 1	The fraction of vans considered to be in traffic jam.
Lanes	TRAFFIC_LANES	integer	No	-1.7976931348623157E308 to 1.7976931348623157E308	How many lanes of traffic there are on this road. A negative value causes vehicles to move in the opposite direction. This is only relevant for roads, intersections, and bridges. This only affects the visualization.
Noise sigma	TRAFFIC_NOISE_SIGMA	dB(A)	No	-1.7976931348623157E308 to 1.7976931348623157E308	Difference in noise intensity of vehicles at their reference speed. Effectively a flat modifier in noise.
Noise tau	TRAFFIC_NOISE_TAU	dB(A)	No	-1.7976931348623157E308 to 1.7976931348623157E308	Difference in noise intensity of vehicles for every order of magnitude difference with their reference speed. Effectively a speed-dependent modifier in noise.
Parking lots	PARKING_LOTS_PER_M2	parking lot/m²	Yes	0 to 1	How many parking lots are available per m² of this building.
Parking lots demand	PARKING_LOTS_DEMAND_PER_M2	parking lot/m²	Yes	0 to 2	How many parking lots are required per m² of this building.
Speedlimit	TRAFFIC_SPEED	km/h	No	0 to 1.7976931348623157E308	How fast vehicles move on this building. This is only relevant for roads, intersections, and bridges. This affects the visualization, and the calculations for the Traffic Noise Overlay.

Other traffic

Function value	Attribute	Unit	Per category	Range	Description

Water

Function value	Attribute	Unit	Per category	Range	Description
Connected to sewer area	SEWERED	boolean	No	0 to 1	Whether this building can be connected to a sewer.
Depth of plant roots	ROOT_DEPTH_M	m	No	0 to 1.7976931348623157E308	The depth of the roots of the plants of this building.
Drainage	DRAINAGE	m	No	-10 to 10	Whether this Building has drainage, which affects the calculation of the Subsidence Overlay.
Ground infiltration per day	GROUND_INFILTRATION_MD	m/day	No	0 to 1.7976931348623157E308	The permeability of this building to water trying to infiltrate into the ground.
Manning value	WATER_MANNING	s/(m1/3)	No	0.01 to 0.255	The manning value of the building, which is a roughness in regards to water flow.
Water evaporation	WATER_EVAPORATION_FACTOR	factor	No	0 to 1.7976931348623157E308	Factor indicating how much a building with a crop, tree or plant function facilitates evapotranspiration. This factor is multiplied with the weather's evaporation rate at a particular time in the simulation.
Water storage	WATER_STORAGE_M2	m³/m²	No	0 to 1.7976931348623157E308	How much water can be stored in this building.

Attributes

Besides the function values which are provided by default, it is possible to add user-defined attributes to function values as well. Any attribute added is automatically available as an attribute for all functions, and all constructions, although the default value of the attribute will be 0.

User-defined attributes added to a function value always apply to the construction as a whole, and cannot be category-specific.

Function value	Attribute	Unit	Per category	Range	Description
(user defined)	(user defined)	(user defined)			Attributes can be used to assign any additional values or properties to functions and the constructions which derive from them.

How-to's

• How to add Functions for editing
• How to change Function Values for a Function
• How to add an Attribute to a Function
• How to change Attributes for a Function