Elevation model: Difference between revisions

From Tygron Preview Support Wiki
Jump to navigation Jump to search
No edit summary
 
(37 intermediate revisions by 5 users not shown)
Line 1: Line 1:
[[File:Api_current_situation_geography.png|thumb|right|400px|[[Elevation model]] in relation to [[Terrain]]s, [[Height sector]]s and [[Elevation GeoTIFF]]s.]]
An elevation model (or DEM, Digital Elevation Model), is a model representation of terrain heights; the quantitative measurement of vertical elevation change in a landscape. On a small scale, differences in terrain height can affect shade and water distribution. On a larger scale, terrain height has an effect on weather and climate patterns.
An elevation model (or DEM, Digital Elevation Model), is a model representation of terrain heights; the quantitative measurement of vertical elevation change in a landscape. On a small scale, differences in terrain height can affect shade and water distribution. On a larger scale, terrain height has an effect on weather and climate patterns.


Line 5: Line 6:
The elevation model (also referred to as DEM) in the {{software}} is a 2-dimensional grid with values indicating the terrain height in meters relative to {{datum}}. [[Terrain]] in this context meaning the soil and the subsurface.  
The elevation model (also referred to as DEM) in the {{software}} is a 2-dimensional grid with values indicating the terrain height in meters relative to {{datum}}. [[Terrain]] in this context meaning the soil and the subsurface.  


The [[3D World]] visualizes the elevation model inherently as the bottom plane upon which all other features, such as [[Construction]]s, are placed. Changes in terrain height are similarly changes in the height of that plane.
The [[3D Visualization]] displays the elevation model inherently as the bottom plane upon which all other features, such as [[building]]s, are placed. Changes in terrain height are similarly changes in the height of that plane.


In the {{software}}, the elevation model offers terrein heights representation as both a [[Digital Terrain Model Overlay|DTM (Digital Terrain Model)]] and as a [[Digital Surface Model Overlay|DSM (Digital Surface Model)]]. A DTM represents the bare ground surface without any objects like plants and buildings. In contrast; a DSM represents the earth's surface including all objects (e.g. houses, trees, etc.) on it. This means features such as [[Construction]]s are explicitly not a part of the DTM, but are a part of the DSM. In locations with [[Water (Terrain Attribute)|water]], the elevation model follows the bottom of the water body for both the DTM and the DSM.
In the {{software}}, the elevation model offers terrain heights representation as both a [[Digital Terrain Model Overlay|DTM (Digital Terrain Model)]] and as a [[Digital Surface Model Overlay|DSM (Digital Surface Model)]]. A DTM represents the bare ground surface without any objects like plants and buildings. In contrast; a DSM represents the earth's surface including all objects (e.g. houses, trees, etc.) on it. This means features such as [[building]]s are explicitly not a part of the DTM, but are a part of the DSM. In locations with [[Water (Terrain Attribute)|water]], the elevation model follows the bottom of the water body for both the DTM and the DSM.


The [[3D World]] visualizes the elevation model inherently as the bottom plane upon which all other features, such as [[Construction]]s, are placed. Changes in terrain height are similarly changes in the height of that plane.
The [[3D Visualization]] displays the elevation model inherently as the bottom plane upon which all other features, such as [[building]]s, are placed. Changes in terrain height are similarly changes in the height of that plane.


The elevation model consists of a single dataset, which is generated when a [[Project]] is first created. Any changes to the elevation model are applied directly to that dataset, including [[manually drawn changes]] as well as [[imported changes]].
The elevation model consists of a single data set, which is generated when a [[Project]] is first created. Any changes to the elevation model are applied directly to that data set, including [[manually drawn changes]] as well as [[imported changes]].
{{clear}}
{{clear}}
===Heightmap Overlay===
{{main|Heightmap Overlay}}
More insight into the elevation model can be provided by adding the [[Heightmap Overlay]], which is a [[Grid Overlay]] showing the (average) height of the terrain per [[grid cell]]. Depending on the [[Overlay]]'s configuration it can show either the DSM or the DTM.


==Elevation model generation==
===Elevation model generation===
The elevation model is generated when a [[Project]] is first created. The [[Advanced options (New Project Wizard)|advanced options]] allow you to select the used data sources and resolution for the elevation model.
The elevation model is generated when a [[Project]] is first created. The [[Advanced options (New Project Wizard)|advanced options]] allow you to select the used data sources and resolution for the elevation model.
[[File:Ahn.jpg|300px|thumb|right|The [[Advanced options (New Project Wizard)|advanced options]] allow you to select the used data sources and resolution for the elevation model.]]
[[File:Ahn.jpg|300px|thumb|right|The [[Advanced options (New Project Wizard)|advanced options]] allow you to select the used data sources and resolution for the elevation model.]]
Line 36: Line 34:
| 0.5m by 0.5m, 1m by 1m, or 2.5m by 2.5m, depending on [[Advanced options (New Project Wizard)#Elevation model resolution|selected options]].
| 0.5m by 0.5m, 1m by 1m, or 2.5m by 2.5m, depending on [[Advanced options (New Project Wizard)#Elevation model resolution|selected options]].
| Raw data from [http://www.ahn.nl Actueel Hoogte Bestand]
| Raw data from [http://www.ahn.nl Actueel Hoogte Bestand]
| https://www.arcgis.com/home/item.html?id=55df27e20c0d42e3a8bd48bc74c5c8cc (AHN2) or https://www.arcgis.com/home/item.html?id=b87c68ea246c4b17807cdad486279a47 (AHN3)
|  
* AHN2: https://www.arcgis.com/home/item.html?id=55df27e20c0d42e3a8bd48bc74c5c8cc
* AHN3: https://www.arcgis.com/home/item.html?id=b87c68ea246c4b17807cdad486279a47
* AHN4: https://www.arcgis.com/home/item.html?id=3aa24b7eeed74fdf8b71b68b05d13fab
|-
|-
| AHN DTM
| AHN DTM
| 0.5m by 0.5m, 1m by 1m, or 2.5m by 2.5m, depending on [[Advanced options (New Project Wizard)#Elevation model resolution|selected options]].
| 0.5m by 0.5m, 1m by 1m, or 2.5m by 2.5m, depending on [[Advanced options (New Project Wizard)#Elevation model resolution|selected options]].
| Interpolated (surface level) data based on [http://www.ahn.nl Actueel Hoogte Bestand]
| Interpolated (surface level) data based on [http://www.ahn.nl Actueel Hoogte Bestand]
| https://www.arcgis.com/home/item.html?id=fc00e93ca66546399d5b7827f61af1db (AHN2) or https://www.arcgis.com/home/item.html?id=9d62ff8889ba41b2b712a68c7493bd16 (AHN3)
|  
* AHN2: https://www.arcgis.com/home/item.html?id=fc00e93ca66546399d5b7827f61af1db
* AHN3: https://www.arcgis.com/home/item.html?id=9d62ff8889ba41b2b712a68c7493bd16  
* AHN4: https://www.arcgis.com/home/item.html?id=1fea0e68b7124dda88373d8538822435
|-
|-
| Features
| Features
Line 49: Line 53:
|}
|}


* By default the AHN3 is used for the DTM and DSM. If the AHN3 is deactivated in the [[Advanced options (New Project Wizard)|advanced options panel]], AHN2 is used.  
* By default the AHN3 is used for the DTM and DSM. AHN2, AHN3, or AHN4 can be selected.
* By default the BGT is used for the features in the [[3D World]]. If the BGT is deactivated in the [[Advanced options (New Project Wizard)|advanced options panel]], TOP10NL is used.  
* If AHN4 is used in a location where coverage is incomplete, no fallback data will be available which means data will be missing in that part of the project.
* By default the BGT is used for the features in the [[3D Visualization]]. If the BGT is deactivated in the [[Advanced options (New Project Wizard)|advanced options panel]], TOP10NL is used.


===DTM (Terrain height)===
===DTM (Terrain height)===
Line 62: Line 67:
** Crop fields/agriculture
** Crop fields/agriculture


===DSM (construction height)===
===DSM (Building height)===
For [[Construction]]s, the average height of the AHN DSM is determined for the polygon defining the [[Construction]]'s footprint.That average height of the AHN DSM is then determined to be the height of the [[Construction]].
For [[building]]s, the average height of the AHN DSM is determined for the polygon defining the [[building]]'s footprint.That average height of the AHN DSM is then determined to be the height of the [[building]].


Using image recognition techniques, the footprint polygon of the [[Construction]]s may be split into multiple [[Construction section]]s, each with their own polygon. The AHN DSM's average height is then determined per individual section, so that the variability in the rooftops of the [[Construction]] can be taken into account.
Using image recognition techniques, the footprint polygon of the [[building]]s may be split into multiple Building [[section]]s, each with their own polygon. The AHN DSM's average height is then determined per individual section, so that the variability in the rooftops of the [[building]] can be taken into account.


The resulting [[Construction]] heights are not made part of the DTM. Instead, they are stored as properties of the [[Construction]]s in the [[Project]].
The resulting [[building]] heights are not made part of the DTM. Instead, they are stored as properties of the [[building]]s in the [[Project]].


===Water===
===Water===
Line 78: Line 83:
The resulting terrain height changes are made part of the DTM.
The resulting terrain height changes are made part of the DTM.


==Elevation model generation (outside the Netherlands)==
[[File:DTM_1.jpg|500px|thumb|left|The angle of repose and water depth m attributes determine the slope and depth of the waterway. When the waterway is wide enough, the water bottom will be flat.]]
[[File:DTM_3.jpg|500px|thumb|Because of the angle of repose, the slopes of a narrow waterway can end in a point, despite the fact that the waterway is not yet as deep as determined in the water depth m attribute.]]
<br clear=all>
To improve the water depth with your own data, see:
* [[How to import a GeoJSON to change the elevation model]]
* [[How to import a GeoTIFF of waterway depths]]
 
===Elevation model generation (outside the Netherlands)===
For the elevation model in projects abroad, the ESRI DTM is used. The resolution differs per location, based on the used data sources for creating the ESRI DTM layer.  
For the elevation model in projects abroad, the ESRI DTM is used. The resolution differs per location, based on the used data sources for creating the ESRI DTM layer.  


Line 93: Line 105:
|}
|}


For the DSM height, the heights of [[Construction]]s are used. If available, the {{Project source|OSM}} building heights are used, otherwise the default heights. The default heights differ per [[Function|function]], based on the [[Default_floors_(Function_Value)|default floors]] and [[Floor_height_m_(Function_Value)|floor height]].  
For the DSM height, the heights of [[building]]s are used. If available, the {{Project source|OSM}} building heights are used, otherwise the default heights. The default heights differ per [[Function|function]], based on the [[Default_floors_(Function_Value)|default floors]] and [[Floor_height_m_(Function_Value)|floor height]].


==How-to's==
==Data format==
The height is stored in [[Height sectors]], which are square 500m x 500m tiles floating point values which store the height data in meters, with a precision of 3 decimals. The amount of points per height sector depend on the DEM resolution configured in advanced options of the [[New Project Wizard]], before project creation, and cannot be increased or decreased later on.
 
==Heightmap Overlays==
More insight into the elevation model can be provided by adding the [[Digital Terrain Model Overlay]] or the [[Digital Surface Model Overlay]], which are [[Grid Overlay|grid overlays]] showing the (average) height per [[grid cell]]. The amount of averaging depends on the configured [[grid cell size]].
 
{{article end
|howtos=
* [[How to change how the default elevation model is generated]]
* [[How to change how the default elevation model is generated]]
* [[How to import a GeoJSON to change the elevation model]]
* [[How to import a GeoJSON to change the elevation model]]
Line 104: Line 123:
* [[How to use the terrain height brush in live sculpting mode]]
* [[How to use the terrain height brush in live sculpting mode]]
* [[How to export the elevation model]]
* [[How to export the elevation model]]
 
* [[How to use a Grid Overlay to change the elevation model]]
==See also==
|seealso=
* [[Terrain]]
* [[Digital Terrain Model Overlay]]
* [[Digital Terrain Model Overlay]]
* [[Digital Surface Model Overlay]]
* [[Digital Surface Model Overlay]]
* [[Elevation GeoTIFF]]
* [[Height sector]]s
* [[Height map]]
* [[Terrain]]s
}}
{{Editor_current_situation_nav}}
[[Category:Terrain]]

Latest revision as of 11:26, 7 November 2023

Elevation model in relation to Terrains, Height sectors and Elevation GeoTIFFs.

An elevation model (or DEM, Digital Elevation Model), is a model representation of terrain heights; the quantitative measurement of vertical elevation change in a landscape. On a small scale, differences in terrain height can affect shade and water distribution. On a larger scale, terrain height has an effect on weather and climate patterns.

Implementation in the Tygron Platform

Source: https://commons.wikimedia.org/wiki/File:DTM_DSM.svg

The elevation model (also referred to as DEM) in the Tygron Platform is a 2-dimensional grid with values indicating the terrain height in meters relative to datum. Terrain in this context meaning the soil and the subsurface.

The 3D Visualization displays the elevation model inherently as the bottom plane upon which all other features, such as buildings, are placed. Changes in terrain height are similarly changes in the height of that plane.

In the Tygron Platform, the elevation model offers terrain heights representation as both a DTM (Digital Terrain Model) and as a DSM (Digital Surface Model). A DTM represents the bare ground surface without any objects like plants and buildings. In contrast; a DSM represents the earth's surface including all objects (e.g. houses, trees, etc.) on it. This means features such as buildings are explicitly not a part of the DTM, but are a part of the DSM. In locations with water, the elevation model follows the bottom of the water body for both the DTM and the DSM.

The 3D Visualization displays the elevation model inherently as the bottom plane upon which all other features, such as buildings, are placed. Changes in terrain height are similarly changes in the height of that plane.

The elevation model consists of a single data set, which is generated when a Project is first created. Any changes to the elevation model are applied directly to that data set, including manually drawn changes as well as imported changes.

Elevation model generation

The elevation model is generated when a Project is first created. The advanced options allow you to select the used data sources and resolution for the elevation model.

The advanced options allow you to select the used data sources and resolution for the elevation model.

In the Netherlands, the following data sources are used to construct the elevation model:

Name Resolution Description Source
ESRI DTM 3m by 3m Dataset supplied by Rijkswaterstaat to ESRI, based on AHN2. https://www.arcgis.com/home/item.html?id=58a541efc59545e6b7137f961d7de883
AHN DSM 0.5m by 0.5m, 1m by 1m, or 2.5m by 2.5m, depending on selected options. Raw data from Actueel Hoogte Bestand
AHN DTM 0.5m by 0.5m, 1m by 1m, or 2.5m by 2.5m, depending on selected options. Interpolated (surface level) data based on Actueel Hoogte Bestand
Features Presence of features of the built environment https://www.pdok.nl/introductie/-/article/basisregistratie-grootschalige-topografie-bgt- (BGT) and https://www.pdok.nl/introductie/-/article/basisregistratie-topografie-brt-historie (Top10NL)
  • By default the AHN3 is used for the DTM and DSM. AHN2, AHN3, or AHN4 can be selected.
  • If AHN4 is used in a location where coverage is incomplete, no fallback data will be available which means data will be missing in that part of the project.
  • By default the BGT is used for the features in the 3D Visualization. If the BGT is deactivated in the advanced options panel, TOP10NL is used.

DTM (Terrain height)

The DTM is generated as follows:

  • The ESRI DTM is resampled to the same resolution as the AHN DTM and AHN DSM.
  • The AHN DTM serves as the base data for the resulting elevation model DTM.
  • In locations where the AHN DTM has NO_DATA values (such as waterbodies), the ESRI DTM is used.
  • Optionally, if the option for applying thresholds is selected, the AHN DSM heights are used instead of the so far determined DTM heights, if the difference between the two does not exceed a certain threshold. The following features can have the DSM heights applied instead:
    • Bare land
    • Roads
    • Crop fields/agriculture

DSM (Building height)

For buildings, the average height of the AHN DSM is determined for the polygon defining the building's footprint.That average height of the AHN DSM is then determined to be the height of the building.

Using image recognition techniques, the footprint polygon of the buildings may be split into multiple Building sections, each with their own polygon. The AHN DSM's average height is then determined per individual section, so that the variability in the rooftops of the building can be taken into account.

The resulting building heights are not made part of the DTM. Instead, they are stored as properties of the buildings in the Project.

Water

Water bodies, found in terrain surface types, are lowered a few meters relative to the elevation of the surrounding surface. The following parameters are used:

From the DTM a point is selected at the waterbody's edge, or as close as possible. The Angle of repose value of the underground Terrain Type present in that point is determined. A downward slope is created at the determined angle of repose. The downward slope continues until either it meets the slope generated from the other end, or it reaches the determined default water depth relative to the DTM. This means that thin waterways will not be as deep as their default water depth allows them to be, and that large water bodies are likely to have flat water bottoms.

The resulting terrain height changes are made part of the DTM.

The angle of repose and water depth m attributes determine the slope and depth of the waterway. When the waterway is wide enough, the water bottom will be flat.
Because of the angle of repose, the slopes of a narrow waterway can end in a point, despite the fact that the waterway is not yet as deep as determined in the water depth m attribute.


To improve the water depth with your own data, see:

Elevation model generation (outside the Netherlands)

For the elevation model in projects abroad, the ESRI DTM is used. The resolution differs per location, based on the used data sources for creating the ESRI DTM layer.

Name Resolution Description Source
ESRI DTM Differs per location, see the metadata for more information Ground height dataset of ESRI, based on multiple sources. https://www.arcgis.com/home/item.html?id=58a541efc59545e6b7137f961d7de883

For the DSM height, the heights of buildings are used. If available, the OSM building heights are used, otherwise the default heights. The default heights differ per function, based on the default floors and floor height.

Data format

The height is stored in Height sectors, which are square 500m x 500m tiles floating point values which store the height data in meters, with a precision of 3 decimals. The amount of points per height sector depend on the DEM resolution configured in advanced options of the New Project Wizard, before project creation, and cannot be increased or decreased later on.

Heightmap Overlays

More insight into the elevation model can be provided by adding the Digital Terrain Model Overlay or the Digital Surface Model Overlay, which are grid overlays showing the (average) height per grid cell. The amount of averaging depends on the configured grid cell size.

How-to's

See also


Editor ribbon icon current.pngCurrent Situation
Current Situation
Buildings • Terrains • Administrative • Areas • Networks • Overlays • Indicators • Panels • Globals •  Queries • Geo Import
Buildings
Function • Function Override • Traffic Units
Terrain
Height sector • Elevation model • Elevation GeoTIFF • Elevation Grid Overlay • Ground Price • Terrain Type • Terrain Type Override
Administrative
Neighborhood • Zone • Permission Popup • Plot • Zip Code
Geo Import
Source • GeoShare
Network
Net Cluster • Net Function • Net Line • Net Load • Net Node • Net Setting
Editor
Current Situation • Future Design • Multi Scenario • Tools • Community
Retrieved from "https://previewsupport.tygron.com/w/index.php?title=Elevation_model&oldid=56199"