Waterwijzer Overlay

From Tygron Support wiki
Revision as of 13:30, 3 September 2020 by Reijn@tygron.com (talk | contribs)
Jump to navigation Jump to search

The waterwijzer overlay provides the yield loss of crops based on several input parameters. The yield loss is currently calculated by the Waterwijzer Landbouw module, which is described here.

Usage

The Waterwijzer Overlay results can be used to:

  • Calculate the yield loss based on existing crops for currently known highest and lowest groundwater levels.
  • Calculate the yield loss for crops when using different groundwater level management strategies simulated by a Groundwater Overlay or a Subsidence Overlay.
  • Determine the best type of crop per parcel given the highest and lowest groundwater levels and type of soil.

Considerations

The Waterwijzer Overlay calculates yield loss for agriculture crops based on:

Result types

The overlay offers the following result types, each storing the agricultural yield loss in percentage. The categories are:

  • Dry: low water levels cause crops to dry out;
  • Wet: high water levels cause crops' roots to suffocate;
  • Indirect: Indirect causes, related to combinations of crop, soil, weather and water levels
  • Salt: salt water irrigation causes damage to crops;
  • Total: the sum of the previous four categories.
  • Waterwijzer damage dry.jpeg
  • Waterwijzer damage wet.jpeg
  • Waterwijzer damage indirect.jpeg
  • Waterwijzer damage salt.jpeg
  • Waterwijzer damage total.jpeg

How-to's

Module

A Waterwijzer Overlay can be configured by opening the Waterwijzer Overlay Wizard. More in-depth information can be found under each of the categories below.