Measure: Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
mNo edit summary
 
(168 intermediate revisions by 8 users not shown)
Line 1: Line 1:
{{stub}}
[[File:Api_future_design.png|thumb|right|400px|[[Measure]]s in relation to other [[Action]]s]]
{{being updated}}
{{learned|what measures are|how measures relate to the Tygron Engine|when to use measures|how to create and change measures}}


==Measures==
In the {{software}}, measures are predefined actions that can be performed by [[stakeholders]]. In contrast to other actions, such as the placement of [[Buildings]], a participant in a project session does not define any properties for the measure. Instead, they can only opt to plan or cancel the measure as it has been defined in the [[editor]]. However, measures can be set up to perform multiple actions at the same time, enabling users to plan a whole design at once.


==How measures relate to the Tygron Engine==
A measure can be used to:
* Place [[Buildings]]. These buildings will be linked to the measure;
* Execute [[terrain]] adjustments. Stored in measure as ''MeasureSpatials'';
* Applying changes in elevation using [[GeoTIFF]]s. Stored in measure as [[TiffSpatial]]s;
* [[Upgrade Type|Upgrade]] existing Buildings that overlap the defined upgrade selection; Stored in measure as ''UpgradeSpatials'';
* Placing [[Levee]]s with side and top [[function]]s; Stored in measure as ''LeveeSpatials'';
* Execute Server [[event]]s. Stored in measure with two lists: one for when measure is constructed and one for when measure is cancelled.


==When to use measures==
These actions are configured as spatial components of the measure, ''spatials'' in short. There are restrictions on which of these spatials may overlap, in order to keep the measure consistent. For example, two [[Building]]s that are on the same [[layer]] cannot overlap. However, other spatial combinations are allowed to overlay. For example, Buildings can be placed on top of GeoTIFF and Terrain spatials.


==Creating and editing measures==
A measure can be owned by a specific [[Stakeholder]]. You can change its name, description, image, cost and constructions details. However, a measure can also be performed by other stakeholders, which may override the [[Stakeholder]] originally specified.
{{Editor ribbon|header=Stakeholders|bar=Measures}}


===Creating and removing measures===
A measure is an [[action]], which means it can be added to an [[Action Menu]]. Also, measures can be activated indirectly using [[events]]. Thirdly, they can be activated directly in the editor by click on the ''Activate Measure'' link:
{{Editor ribbon|header=Stakeholders|bar=Measures}}
{{Editor location|Measures|Measure|General}}
[[File:Measures-left.jpg|frame|left|The left panel allows you to select measures.]]
{{Editor steps|title=create a new measure|Select "Stakeholders" in the ribbon header.|Select "Measures" in the ribbon bar.|Select "Add" in the [[editor#Left_Panel|left panel]].}}
{{Editor steps|title=duplicate an existing measure|Select "Stakeholders" in the ribbon header.|Select "Measures" in the ribbon bar.|Select an existing measure you wish to duplicate.|Select "Duplicate" in the [[editor#Left_Panel|left panel]].}}
{{Editor steps|title=remove an existing measure|Select "Stakeholders" in the ribbon header.|Select "Measures" in the ribbon bar.|Select the measure you wish to remove.|Select "Remove" in the [[editor#Left_Panel|left panel]].}}<br clear=all>


===Editing general measure properties===
==When to use measures==
{{Editor ribbon|header=Stakeholders|bar=Measures|left=Measure}}
A measure can be used to offer predefined plans to stakeholders. When a plan exists, applicable to the case implemented in the project, that plan can be implemented as a measure. Such a plan can consist of the spatial components of the plan, as well specific costs, and other eventual consequences of implementing that plan.  
[[File:Measures-right.jpg|frame|left|The right panel allows you to edit properties.]]
A measure has many properties that may be adjusted. The measure's general properties can be adjusted when the measure itself is selected in the left panel.


====Name====
A measure doesn't need to have a spatial components. Instead, it can also be used to represent a policy change or campaign, which may have consequences for indicators, or may trigger events.
[[File:measures-right-name.jpg|frame|right|The field for the "name".]]
: ''The name of the measure. This is the name which will appear in a [[stakeholders|stakeholder's]] list of [[actions]]. Depending on the effects of the measure, it is important to provide a descriptive name. You can change this by altering the text in the text field.''<br clear=right>


====Owner====
Measures can also be activated via [[event]]s. This means that a measure does not necessarily need to be enacted by a stakeholder, but can also be activated at the start of a [[scenario]], by reaching a certain point in a [[cinematic]], or even by planning or canceling another measure. If any of these occurrences should have a spatial consequence or an effect on an indicator, a measure can also be used to define these consequences.
[[File:measures-right-owner.jpg|frame|right|The field for the "owner".]]
: ''The owner of the measure. This is the stakeholder who will be considered the stakeholder performing the measure, if it is not directly enacted via a [[stakeholders|stakeholder's]] list of [[actions]]. You can change this by selecting a different stakeholder in the dropdown menu.''<br clear=right>


====Image====
==Creating and editing measures==
[[File:measures-right-image.jpg|frame|right|The selector for the "image".]]
Measures have a large number of properties. Depending on the complexity of the measure you intend to create, a variety of panels may need to be used to properly configure all properties of a measure.
: ''The image seen when the measure is selected in a stakeholder's list of actions. A fitting image will help users identify the measure at a glance. You can change this by clicking the image, and selecting a new image in the opened window.''<br clear=right>
 
====Requires confirmation====
[[File:measures-right-confirmation.jpg|frame|right|The checkbox for the property of requiring confirmation.]]
: ''Whether the measure will require confirmation from other stakeholders. If this is the case, when the measure is planned, the appropriate stakeholders (such as the owners of land and buildings, and the municipality) will need to approve the measure via a [[popups|popup]]. To change this, check or uncheck the checkbox.''<br clear=right>
 
====Start automatically on date====
[[File:measures-right-date.jpg|frame|right|The checkbox and field for the property of automatic starting date.]]
: ''Whether the measure will automatically be performed on a given date. When the checkbox is unchecked, the measure will not be automatically performed. When the checkbox is checked, the measure will automatically be performed when the [[time]] in the session reaches the point specified in the textfield. To change this property, check or uncheck the checkbox. To change the date on which to automatically perform the measure, change the date in the text field''<br clear=right>
 
====Description====
[[File:measures-right-description.jpg|frame|right|The field for the "description".]]
: ''The description of the measure. This will also appear in a stakeholder's list of actions when the measure is selected. In addition to the name, a good description can be necessary to convey the intent and effect of the measure. You can change this by altering the text in the text area.''<br clear=right>
 
===Editing Cost Details===
{{Editor ribbon|header=Stakeholders|bar=Measures|left=Measure|Cost Details}}
[[File:Measures-right-cost.jpg|frame|left|The right panel allows you to edit properties.]]
 
====Construction Time====
[[File:measures-right-cost-contime.jpg|frame|right|The field for the "construction time".]]
: ''The construction time in months. This is how long it takes in [[timeline]] projects to perform the measure. You can change this by altering the number in the "construction time" field.''<br clear=right>
 
====Demolition Time====
[[File:measures-right-cost-demotime.jpg|frame|right|The field for the "demolition time".]]
: ''The demolition time in months. This is how long it takes in [[timeline]] projects to demolish the measure. You can change this by altering the number in the "demolition time" field.''<br clear=right>
 
====Construction cost====
[[File:measures-right-cost-concost.jpg|frame|right|The field for the "construction cost".]]
: ''The construction cost. This is the impact the measure will have on the enacting stakeholder's budget when the measure is enacted. This cost is in addition to any cost brought forth by spatial aspects of the measure, such as the placement of buildings. The cost type can be set to the following values:''
:* ''NONE (No additional costs)''
:* ''FIXED (A fixed additonal cost)''
:* ''VOLUME (An additional cost based on the area/volume of the spatial aspects of the measure)''
: ''You can change this by selecting the desired cost type using the dropdown, and entering or changing the number in the field below it.''
<br clear=right>
 
====Demolition cost====
[[File:measures-right-cost-democost.jpg|frame|right|The field for the "demolition cost".]]
: ''The demolition cost. This is the impact the measure will have on the enacting stakeholder's budget when the measure is demolished. This cost is in addition to any cost brought forth by spatial aspects of the measure, such as the placement of buildings. The cost type can be set to the following values:''
:* ''NONE (No additional costs)''
:* ''FIXED (A fixed additonal cost)''
:* ''VOLUME (An additional cost based on the area/volume of the spatial aspects of the measure)''
: ''You can change this by selecting the desired cost type using the dropdown, and entering or changing the number in the field below it.''
<br clear=right>
 
====Fixed Water Storage====
[[File:measures-right-cost-water.jpg|frame|right|The field for the "water storage".]]
: ''The amount of water storage this measure provides for the area. You can change this by altering the number in the "Fixed water storage" field field below it.''
<br clear=right>


===Editing Events===
* [[How to add and remove measures]]
{{Editor ribbon|header=Stakeholders|bar=Measures|left=Measure|Events}}
* [[How to edit general measure properties]]
[[File:Measures-right-events.jpg|frame|left|The right panel allows you to add and remove events.]]
* [[How to edit measure cost details]]
<!--[[File:measures-bottom-events.jpg|frame|right|The bottom panel allows you to edit individual events.]]-->
* [[How to edit measure events]]
When a measure reaches a certain state (such as being planned, completed, planned for demolition, or demolished), it is possible to trigger one or more [[event]]s. For each state of the measure, a list of events exists.
* [[How to edit spatial components of a measure]]
* [[How to add a GeoTIFF to a measure]]
* [[How to import a measure with water]]
* [[How to add an Area to a Measure]]


====Selecting events====
==Advanced usage of measures==
[[File:measures-right-events-list.jpg|frame|right|The list of events.]]
Because measures can have a large variety of effects, and can be activated via events, measures can be extremely powerful. Correctly using measures can allow an editing user to create very intricate or specific effects in a project. This does tend to make a project more complex, but can have benefits for the maintainability of a project.
: ''The list of events allows you to select any event currently connected to the measure. By changing the state in the dropdown menu, you can switch between the lists of events present for this measure.''<br clear=right>


====Adding and removing events events====
===Not showing spatial effects===
[[File:measures-right-events-buttons.jpg|frame|right|The buttons for adding and removing events.]]
Normally, when a user selects a measure in their [[action]] menu, the spatial effects of that measure are shown. This means locations on the map where the measure has its effect are highlighted, and the user's camera is moved to that location. However, this may not always be necessary or desirable. To prevent this, it is possible to implement the measure as two measures. A first measure, with the proper costs and description, which the stakeholder will see in the [[Action Menu]]. A second measure is not directly visible to the stakeholder, but has the actual spatial effect. The first measure can then, upon activation, [[events|trigger]] the activation of the second measure.
: ''To add an event to the measure, select the state at which you would like the event to trigger, and select either "Add Server Event" or "Add Client Event" to add the appropriate event to the measure. To remove an event, select it in the list and select "Remove".''<br clear=right>


====Changing events====
===Reusing measures===
[[File:measures-bottom-events.jpg|frame|right|The bottom panel when editing events.]]
Using the above principle, it is also possible to reuse measure. If multiple measures would have the same spatial effect, it is possible to have an additional measure in which the actual spatial effect is defined. All measures which should have that spatial effect can trigger the additional measure. This has the benefit of being easier to maintain if the spatial effect needs to change. Any change to the plan would only require a change to a single measure, instead of all measures which have the same effect.
: ''When an event is selected in the right panel, you can edit the properties of the event in the bottom panel. You can change the type of event by selecting the desired event from the list of events. If additional parameters are required, fields for these parameters will appear in the bottom panel as well, and can be filled in as required. When the event has been configured as desired, you can select "Commit" to confirm these changes. If you do press "Commit" before closing the panel, your changes are not changed. You can also press "Cancel" to undo your changes.<br clear=all>


===Editing Indicator Scores===
{{article end
{{Editor ribbon|header=Stakeholders|bar=Measures|left=Measure|Indicator Scores}}
|seealso=
[[File:Measures-right-indicators.jpg|frame|left|The right panel allows you to edit properties.]]<br clear=all>


===Editing spatial effects===
}}
{{Editor ribbon|header=Stakeholders|bar=Measures|left=Measure}}
{{Template:Editor_future_design_nav}}
====Buildings====
[[Category:Items]][[Category:Measure]][[Category:Action]]
====Landmarks====
====Upgrades====
====Spatials====

Latest revision as of 08:10, 1 February 2024

Measures in relation to other Actions

In the Tygron Platform, measures are predefined actions that can be performed by stakeholders. In contrast to other actions, such as the placement of Buildings, a participant in a project session does not define any properties for the measure. Instead, they can only opt to plan or cancel the measure as it has been defined in the editor. However, measures can be set up to perform multiple actions at the same time, enabling users to plan a whole design at once.

A measure can be used to:

  • Place Buildings. These buildings will be linked to the measure;
  • Execute terrain adjustments. Stored in measure as MeasureSpatials;
  • Applying changes in elevation using GeoTIFFs. Stored in measure as TiffSpatials;
  • Upgrade existing Buildings that overlap the defined upgrade selection; Stored in measure as UpgradeSpatials;
  • Placing Levees with side and top functions; Stored in measure as LeveeSpatials;
  • Execute Server events. Stored in measure with two lists: one for when measure is constructed and one for when measure is cancelled.

These actions are configured as spatial components of the measure, spatials in short. There are restrictions on which of these spatials may overlap, in order to keep the measure consistent. For example, two Buildings that are on the same layer cannot overlap. However, other spatial combinations are allowed to overlay. For example, Buildings can be placed on top of GeoTIFF and Terrain spatials.

A measure can be owned by a specific Stakeholder. You can change its name, description, image, cost and constructions details. However, a measure can also be performed by other stakeholders, which may override the Stakeholder originally specified.

A measure is an action, which means it can be added to an Action Menu. Also, measures can be activated indirectly using events. Thirdly, they can be activated directly in the editor by click on the Activate Measure link:

Editor → Future Design (Ribbon tab) → Measures (Ribbon bar) → Measure → General

When to use measures

A measure can be used to offer predefined plans to stakeholders. When a plan exists, applicable to the case implemented in the project, that plan can be implemented as a measure. Such a plan can consist of the spatial components of the plan, as well specific costs, and other eventual consequences of implementing that plan.

A measure doesn't need to have a spatial components. Instead, it can also be used to represent a policy change or campaign, which may have consequences for indicators, or may trigger events.

Measures can also be activated via events. This means that a measure does not necessarily need to be enacted by a stakeholder, but can also be activated at the start of a scenario, by reaching a certain point in a cinematic, or even by planning or canceling another measure. If any of these occurrences should have a spatial consequence or an effect on an indicator, a measure can also be used to define these consequences.

Creating and editing measures

Measures have a large number of properties. Depending on the complexity of the measure you intend to create, a variety of panels may need to be used to properly configure all properties of a measure.

Advanced usage of measures

Because measures can have a large variety of effects, and can be activated via events, measures can be extremely powerful. Correctly using measures can allow an editing user to create very intricate or specific effects in a project. This does tend to make a project more complex, but can have benefits for the maintainability of a project.

Not showing spatial effects

Normally, when a user selects a measure in their action menu, the spatial effects of that measure are shown. This means locations on the map where the measure has its effect are highlighted, and the user's camera is moved to that location. However, this may not always be necessary or desirable. To prevent this, it is possible to implement the measure as two measures. A first measure, with the proper costs and description, which the stakeholder will see in the Action Menu. A second measure is not directly visible to the stakeholder, but has the actual spatial effect. The first measure can then, upon activation, trigger the activation of the second measure.

Reusing measures

Using the above principle, it is also possible to reuse measure. If multiple measures would have the same spatial effect, it is possible to have an additional measure in which the actual spatial effect is defined. All measures which should have that spatial effect can trigger the additional measure. This has the benefit of being easier to maintain if the spatial effect needs to change. Any change to the plan would only require a change to a single measure, instead of all measures which have the same effect.