Water Overlay: Difference between revisions

Latest revision as of 13:40, 17 January 2023

A Water Overlay is a grid overlay for which results are calculated by the Water Module. The Basic theory of the Water Module in the Tygron Platform is an implementation of a 2D grid based shallow water model based on the 2D Saint Venant equations. The module is further enhanced with infiltration, evaporation, groundwater flow and hydraulic structures. Depending on the use case, the simulated period can be set to few seconds and up to a few months. The theory section describes in detail how calculations are performed.

To perform the calculations, the project area is divided into a grid of cells. Each cell has a specific quantity of water and specific hydrological parameters based on the data in the project. The total time which should be simulated is divided into discrete timesteps. Per timestep, each cell communicates with its adjacent cells to exchange water, based on its water level, surface height, current flow direction and other factors. Accuracy and reliability is obtained by dividing the project area and simulation time into sufficiently small cells and steps, at the cost of more computation time.

The final results of the calculation can be inspected, as well as intermediate snapshots of the hydrological situation during the simulation, known as timeframes.

Variants

A Water Module will be initialized by adding one of the following Overlays to a project. Each variant has a number of parameters tuned to best fit specific use-cases. This means that each of these overlays is based on the same theory and calculation method, however they are customized to conveniently provide insight in different aspects of the Water Module.

	Rainfall Overlay	provides insight into the water stress and impact caused by (excessive) rainfall
	Flooding Overlay	provides insight into water stress and impact caused by breaches in levees or other sources causing excessive water inflow
	Groundwater Overlay	provides insight into long-term processes of water flow both on the surface and underground

Results

With a Water Overlay, a user can generate multiple results for a single water simulation. For further information about these outcomes, see also results and result types.

How-to's

Features and components

Attributes

Group: Results
Output keys

Object flow output • Object height output • Object datum output a • Object datum output b • Object width output
Output other

Result type • Water balance • System visualization • Weather visualization • Debug info
Related

Building attributes • Hydraulic structures • Hydrological features • Terrain attributes • Model attributes • Simulation data

Categorization

Grid • Parent • Result Child • Result Parent • Result type
Default

City
Administrative

Ownership • Ownership Grid • Zipcodes • Zoning • Neighborhoods • Municipalities • Vacancy
Environmental

Heat Stress • Traffic Density • Traffic Noise • Traffic NO2 • Livability
Water

Rainfall • Flooding • Groundwater • Subsidence • Watershed
Grid Calculation

Average • Combo • Distance • Sight Distance • Travel Distance • Inference • Iteration

Geo Data

GeoTIFF • WCS • WMS • Image • Area • Attribute • Function
Topography

Satellite • Digital Surface Model • Digital Terrain Model • Underground • Source
Network

Network Distance • Network Overview • Network Ownership

@@ Line 1: / Line 1: @@
-A Water Overlay is an [[Overlay|overlay]] for which results are calculated by the [[Water Module]]. The [[Water_module_introduction|Basic theory of the Water Module]] in the {{software}} is an implementation of a 2D grid based shallow water model based on the 2D Saint Venant equations. The module is further enhanced with infiltration, evaporation, groundwater flow and hydraulic structures. Its calculations form a simulation of an arbitrary amount of time, during which water is allowed to move.
+A Water Overlay is a [[Grid Overlay|grid overlay]] for which results are calculated by the [[Water Module]]. The [[Water_Module_Basics|Basic theory of the Water Module]] in the {{software}} is an implementation of a 2D grid based shallow water model based on the 2D Saint Venant equations. The module is further enhanced with infiltration, evaporation, groundwater flow and hydraulic structures. Depending on the use case, the simulated period can be set to few seconds and up to a few months. The [[Water_Module_Theory|theory]] section describes in detail how calculations are performed.
+__NOTOC__
+To perform the calculations, the project area is divided into a [[Grid overlay|grid of cells]]. Each cell has a specific quantity of water and specific hydrological parameters based on the data in the project. The total time which should be simulated is divided into discrete [[Timestep formula (Water Overlay)|timesteps]]. Per timestep, each cell communicates with its adjacent cells to exchange water, based on its water level, surface height, current flow direction and other factors. Accuracy and reliability is obtained by dividing the project area and simulation time into sufficiently small cells and steps, at the cost of more computation time.
-To perform the calculations, the project area is divided into a [[Grid overlay|grid of cells]]. Each cell has a specific quantity of water and specific hydrological parameters based on the data in the project. The total time which should be simulated is divided into discrete [[Timestep formula (Water Overlay)|timesteps]]. Per timestep, each cell communicates with its adjacent cells to exchange water, based on it's water level, surface height, current flow direction and other factors. Accuracy and reliability is obtained by dividing the project area and simulation time into sufficiently small cells and steps, at the cost of more computation time.
+The final results of the calculation can be inspected, as well as intermediate snapshots of the hydrological situation during the simulation, known as [[Timeframes (Water Overlay)|timeframes]].
-The final results of the calculation can be inspected, as well as intermediate snapshots of the hydrological situation during the simulation, known as [[Timeframes model attribute (Water Overlay)|timeframes]].
-<ul>
-<li style="display: inline-block;">
-<div class="module-button">
-<div class="module-button-text">[[Water Module]]</div>
-</div>
-</li>
-</ul>
 ==Variants==
-The water module can be called upon by adding one of the following overlays to a project. Each variant has a number of parameters tuned to best fit specific use-cases.
+A Water Module will be initialized by adding one of the following Overlays to a project. Each variant has a number of parameters tuned to best fit specific use-cases. This means that each of these overlays is based on the same theory and calculation method, however they are customized to conveniently provide insight in different aspects of the Water Module.
 {| class="wikitable"
 |[[File:Overlay_rainfall.png]]
@@ Line 29: / Line 21: @@
 |}
 <!--==Input Data and Settings==
-The calculations performed by the water overlay are influenced by many kinds of geographical information present in the project area. For any given location, [[terrain]], [[construction]]s and other features can influence either the initial state of the simulation or how water flows in a given area.
+The calculations performed by the Water Overlay are influenced by many kinds of geographical information present in the project area. For any given location, [[terrain]], [[construction]]s and other features can influence either the initial state of the simulation or how water flows in a given area.
-Furthermore, the water overlay features a number of overall settings which can be configured for the hydrological calculations and its results. These settings do not have a geographical or temporal element to them, and are fixed values relevant for the simulation as a whole.
+Furthermore, the Water Overlay features a number of overall settings which can be configured for the hydrological calculations and its results. These settings do not have a geographical or temporal element to them, and are fixed values relevant for the simulation as a whole.
-;[[Hydrologic_features_(Water_Overlay)|Hydological features]]
+;[[Hydrologic_features_(Water_Overlay)|Hydrological features]]
 :The water system can be enhanced with a number of hydrological features, which can be loaded in as [[area]]s. These hydrological features form special properties or modifications on the hydrological system. See [[Hydrologic_features_(Water_Overlay)|Hydological features]] for a list of supported features.
 ;[[Hydraulic structures (Water Overlay)|Hydraulic structures]]
 :See [[Hydraulic structures (Water Overlay)|Hydraulic structures]] for the list of supported structures.
-;[[Additional_hydrological_attributes_of_constructions_(Water Overlay)|Hydrological attributes of constructions]]
+;[[Additional_hydrological_attributes_of_buildings_(Water Overlay)|Hydrological attributes of buildings]]
-:Besides the [[construction]]s which directly influence the hydrologic model as a [[Hydraulic structures (Water Overlay)|hydraulic structure]], each construction may also have attributes which can contribute to the hydrological model in some way. These attributes are stored and used on a grid cell level. This is different from the hydraulic structure attributes, which are stored and used on an object level. For a full list, see [[Additional_hydrological_attributes_of_constructions_(Water Overlay)|Additional hydrological attributes of constructions]].
+:Besides the [[building]]s which directly influence the hydrologic model as a [[Hydraulic structures (Water Overlay)|hydraulic structure]], each building may also have attributes which can contribute to the hydrological model in some way. These attributes are stored and used on a grid cell level. This is different from the hydraulic structure attributes, which are stored and used on an object level. For a full list, see [[Additional_hydrological_attributes_of_buildings_(Water Overlay)|Additional hydrological attributes of buildings]].
 ;[[Terrain_attributes_(Water_Overlay)| Hydrological attributes of terrain]]
-:[[Terrain]]s in a project have a number of hydrological attributes which can influence the flow of water in a project. Because there is always both surface and underground terrain defined for the entirety of the project area, all cells are affected by all attributes of terrains, unless a construction is present with overwriting values. For a full list, see [[Terrain_attributes_(Water_Overlay)| Terrain attributes for the water overlay]].
+:[[Terrain]]s in a project have a number of hydrological attributes which can influence the flow of water in a project. Because there is always both surface and underground terrain defined for the entirety of the project area, all cells are affected by all attributes of terrains, unless a building is present with overwriting values. For a full list, see [[Terrain_attributes_(Water_Overlay)| Terrain attributes for the water overlay]].
 ;[[Model_attributes_(Water_Overlay)|Model settings]]
 :For a full list, see: [[Model_attributes_(Water_Overlay)|Water Model attributes]]
 ==Troubleshoot, warnings and recommendations==
-When the water overlay is used and calculations take place, there are some problems or points of attention the calculation can run into. Where possible, the water overlay will show appropriate warnings when running into any issues.
+When the Water Overlay is used and calculations take place, there are some problems or points of attention the calculation can run into. Where possible, the Water Overlay will show appropriate warnings when running into any issues.
 See [[Warning_and_recommendations_(Water_Overlay)|Troubleshoot, warnings and recommendations]];
 -->
 ==Results==
-A water overlay generates different results. For further information about these outcomes, see also [[Results_(Water_Overlay)|results]] and [[Result type (Water Overlay)|result types]].
+With a Water Overlay, a user can generate multiple [[Results_(Water_Overlay)|results]] for a single water simulation. For further information about these outcomes, see also [[Results_(Water_Overlay)|results]] and [[Result type (Water Overlay)|result types]].
 ==How-to's==
-* [[How-to add and remove an overlay|Add and remove an overlay]]
+* [[How to add and remove an Overlay]]
-* [[How-to configure a Water Overlay|Configure a Water Overlay]]
+* [[How to manually configure a Water Overlay|Configure a Water Overlay]]
-* [[How-to use a Water Overlay|Use a Water Overlay]]
+* [[How to edit an overlay legend|Edit an overlay legend]]
-* [[How-to edit an overlay legend|Edit an overlay legend]]
+* [[How to add Subsidence (Water Overlay)|Combine with Subsidence Overlay]]
-* [[How-to_add_Subsidence_Overlay|Combine with Subsidence Overlay]]
+* [[Water Model Limits]] (some basic rules)
+===Features and components===
+* [[Hydrological features (Water Overlay)|Hydrological features]]
+* [[Hydraulic structures (Water Overlay)|Hydraulic structures]]
+* [[How to_manually_configure_a_Water_Overlay|Manual configuration Options]]
+* [[Simulation data (Water Overlay)|Simulation data]]
+===Attributes===
+* [[Model attributes (Water Overlay)|Water Module Attributes]]
+* [[Hydrological attributes of buildings (Water Overlay)|Hydrological Attributes of Buildings]]
+* [[Hydrological attributes of terrains (Water Overlay)|Hydrological Attributes of Terrains]]
+{{WaterOverlay output nav}}
+{{Overlay nav}}
-{{Template:Overlay nav}}
+[[Category:Water Module]][[Category:Overlays with result types]]